Class grav_sed
In: vdiffusion/grav_sed.f90

重力沈降過程

Gravitational sedimentation process

Note that Japanese and English are described in parallel.

重力沈降過程を計算するモジュールです.

This module calculates gravitational sedimentation.

Procedures List

GravSed :計算
GravSedInit :初期化
————— :————
GravSed :Calculation
GravSedInit :Initialization

NAMELIST

NAMELIST#grav_sed_nml

References

  • Conrath, B. J., 1975: Thermal structure of the Martian atmosphere during the dissipation of the dust storm of 1971, Icarus, 24, 36--46.
  • Lin, S.-J., and R. B. Rood, 1996: Multidimensional flux-form semi-Lagrangian transport scheme, Mon. Wea. Rev., 124, 2046--2070.

Methods

Included Modules

dc_types dc_message composition gridset gtool_historyauto timeset constants namelist_util dc_iounit

Public Instance methods

Subroutine :
SpcName :character(*), intent(in )
xyr_Press(0:imax-1, 1:jmax, 0:kmax) :real(DP) , intent(in )
xyz_VirTemp(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(in )
xyr_Height(0:imax-1, 1:jmax, 0:kmax) :real(DP) , intent(in )
xyz_QMix(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(inout)
xy_SurfGravSedFlux(0:imax-1, 1:jmax) :real(DP) , intent(out ), optional

[Source]

  subroutine GravSed( SpcName, xyr_Press, xyz_VirTemp, xyr_Height, xyz_QMix, xy_SurfGravSedFlux )

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoPut

    ! 組成に関わる配列の設定
    ! Settings of array for atmospheric composition
    !
    use composition, only: a_QMixName, CompositionInqIndex

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, TimesetClockStart, TimesetClockStop, DelTime                 ! $ \Delta t $ [s]

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: Grav, GasRDry
                              ! $ R $ [J kg-1 K-1].
                              ! 乾燥大気の気体定数.
                              ! Gas constant of air


    character(*), intent(in   ) :: SpcName
    real(DP)    , intent(in   ) :: xyr_Press  (0:imax-1, 1:jmax, 0:kmax)
    real(DP)    , intent(in   ) :: xyz_VirTemp(0:imax-1, 1:jmax, 1:kmax)
    real(DP)    , intent(in   ) :: xyr_Height (0:imax-1, 1:jmax, 0:kmax)
    real(DP)    , intent(inout) :: xyz_QMix   (0:imax-1, 1:jmax, 1:kmax)
    real(DP)    , intent(out  ), optional :: xy_SurfGravSedFlux(0:imax-1, 1:jmax)


    !
    ! local variables
    !
    ! rhod : dust density
    ! mfp  : mean free path
    ! mvc  : modecular viscosity coefficient
    ! rdia : particle diameter
    !
    real(DP) :: PartDen
    real(DP) :: PartDia
    real(DP) :: MeanFreePath
    real(DP) :: MolVisCoef

    real(DP) :: MeanFreePathRef
    real(DP) :: PressLambdaRef


    real(DP) :: xyz_DelAtmMass  (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyz_DelCompMass (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyz_DelZ        (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyr_SedVel      (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyr_FracSedDist (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyr_Dist        (0:imax-1, 1:jmax, 0:kmax)
    integer  :: xyr_KIndex      (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyr_QMixFlux    (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyr_IntQMixFlux (0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyr_FracQMixFlux(0:imax-1, 1:jmax, 0:kmax)
    real(DP) :: xyz_DQMixDt     (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: xyz_QMixA       (0:imax-1, 1:jmax, 1:kmax)
    real(DP) :: LogPress
    real(DP) :: Press


    integer  :: i
    integer  :: j
    integer  :: k
    integer  :: kk


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. grav_sed_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if



    ! Calculation of mass in each layer and layer thickness in unit of meter
    !   Layer thickness is calculated by using mass of a layer.
!!$    xyz_Rho = xyz_Press / ( GasRDry * xyz_VirTemp )
    do k = 1, kmax
      xyz_DelAtmMass(:,:,k) = ( xyr_Press(:,:,k-1) - xyr_Press(:,:,k) ) / Grav
    end do
!!$    xyz_DelZ = xyz_DelAtmMass / xyz_Rho
    do k = 1, kmax
      xyz_DelZ(:,:,k) = xyr_Height(:,:,k) - xyr_Height(:,:,k-1)
    end do


    ! Calculation of mass of constituents in a layer
    xyz_DelCompMass = xyz_QMix * xyz_DelAtmMass


    !
    ! calculation of sedimentation terminal velocity
    !
    if ( SpcName == 'MarsDust' ) then

      !
      ! The values below are obtained from Conrath (1975). 
      ! Particle radius of 1e-6 m is assumed. 
      !
      MolVisCoef      = 1.5d-4 * 1.0d-3 * 1.0d2
      MeanFreePathRef = 2.2d-4 * 1.0d-2
      PressLambdaRef  = 25.0d2
      PartDen         = 3.0d3
      PartDia         = 2.0_DP * 1.0d-6

      xyr_SedVel = aaa_SedVel( MolVisCoef, MeanFreePathRef, PressLambdaRef, PartDen, PartDia, max( xyr_Press, 1.0d-20 ) )
      k = kmax
      xyr_SedVel(:,:,k) = 0.0_DP

    else if ( SpcName == 'MarsH2OCloud' ) then

      !
      ! The values below are obtained from Conrath (1975). 
      !
      MolVisCoef      = 1.5d-4 * 1.0d-3 * 1.0d2
      MeanFreePathRef = 2.2d-4 * 1.0d-2
      PressLambdaRef  = 25.0d2
      !
      ! Particle radius of 1e-6 m is assumed. 
      !
      PartDen         = 1.0d3
      PartDia         = 2.0_DP * 1.0d-6

      xyr_SedVel = aaa_SedVel( MolVisCoef, MeanFreePathRef, PressLambdaRef, PartDen, PartDia, max( xyr_Press, 1.0d-20 ) )
      k = kmax
      xyr_SedVel(:,:,k) = 0.0_DP

    else
      call MessageNotify( 'E', module_name, 'Specie %c is inappropriate', c1 = trim( SpcName ) )
    end if


    ! Calculation of sedimentation distance during a time step of 2 * DelTime
    xyr_Dist = abs( xyr_SedVel ) * 2.0_DP * DelTime
    do k = 0, kmax-1
      do j = 1, jmax
        do i = 0, imax-1

          ! A k index in which all mass of the layer does not fall is 
          ! searched. In addition, fractional sedimentation velocity is 
          ! calculated. 
          xyr_KIndex(i,j,k) = -1
          do kk = k+1, kmax-1
            ! If sedimentation velocity (distance) is positive, and all of 
            ! mass in kk layer does not fall, KIndex is kk.
            if ( ( xyr_Dist(i,j,k) >= 0.0_DP ) .and. ( xyr_Dist(i,j,k) <= xyz_DelZ(i,j,kk) ) ) then
              xyr_KIndex     (i,j,k) = kk
              xyr_FracSedDist(i,j,k) = xyr_Dist(i,j,k)
            end if
            ! Sedimentation distance is decreased for preparation for next 
            ! layer.
            ! If xyz_Dist become negative, any mass of the upper layer does 
            ! not fall.
            xyr_Dist(i,j,k) = xyr_Dist(i,j,k) - xyz_DelZ(i,j,kk)
          end do
          ! Calculation for upper most layer.
          kk = kmax
          if ( xyr_Dist(i,j,k) >= 0.0_DP ) then
            xyr_KIndex     (i,j,k) = kk
            xyr_FracSedDist(i,j,k) = min( xyr_Dist(i,j,k), xyz_DelZ(i,j,kk) )
          end if

        end do
      end do
    end do
    ! K index and fractional sedimentation velocity at model top.
    ! No flux is assumed at the model top. 
    k = kmax
    xyr_KIndex     (:,:,k) = -1
    xyr_FracSedDist(:,:,k) = 0.0_DP


    ! Calculation of integer mass flux.
    xyr_IntQMixFlux = 0.0_DP
    do k = 0, kmax-1
      do j = 1, jmax
        do i = 0, imax-1

          do kk = k+1, xyr_KIndex(i,j,k)-1
            xyr_IntQMixFlux(i,j,k) = xyr_IntQMixFlux(i,j,k) + xyz_DelCompMass(i,j,kk)
          end do
          xyr_IntQMixFlux(i,j,k) = xyr_IntQMixFlux(i,j,k) / ( 2.0_DP * DelTime )

        end do
      end do
    end do

    ! Add sign of sedimentation velocity.
    ! This is equivalent to mulplying -1.
    xyr_IntQMixFlux = sign( 1.0_DP, xyr_SedVel ) * xyr_IntQMixFlux


    ! Calculation of fractional mass flux
    k = kmax
    xyr_FracQMixFlux(:,:,k) = 0.0_DP
    do k = kmax-1, 0, -1
      do j = 1, jmax
        do i = 0, imax-1
          kk = xyr_KIndex(i,j,k)
          !-----
          ! Simple method
!!$            xyrf_FracQMixFlux(i,j,k,n) =                       &
!!$              &   xyrf_FracSedDist(i,j,k,n) / xyz_DelZ(i,j,kk) &
!!$              & * xyzf_DelCompMass(i,j,kk,n)
          !-----
          ! Method considering exponential distribution of mass with height
          if ( xyr_Press(i,j,kk) == 0.0_DP ) then
            LogPress = log( xyr_Press(i,j,kk-1) * 1.0d-1 / xyr_Press(i,j,kk-1) ) / xyz_DelZ(i,j,kk) * xyr_FracSedDist(i,j,k) + log( xyr_Press(i,j,kk-1) )
            Press = exp( LogPress )
            xyr_FracQMixFlux(i,j,k) = ( xyr_Press(i,j,kk-1) - Press                        ) / ( xyr_Press(i,j,kk-1) - xyr_Press(i,j,kk-1) * 1.0d-1 ) * xyz_DelCompMass(i,j,kk)
          else
            LogPress = log( xyr_Press(i,j,kk) / xyr_Press(i,j,kk-1) ) / xyz_DelZ(i,j,kk) * xyr_FracSedDist(i,j,k) + log( xyr_Press(i,j,kk-1) )
            Press = exp( LogPress )
            xyr_FracQMixFlux(i,j,k) = ( xyr_Press(i,j,kk-1) - Press             ) / ( xyr_Press(i,j,kk-1) - xyr_Press(i,j,kk) ) * xyz_DelCompMass(i,j,kk)
          end if
          !-----
          xyr_FracQMixFlux(i,j,k) = xyr_FracQMixFlux(i,j,k) / ( 2.0_DP * DelTime )
        end do
      end do
    end do

    ! Add sign of sedimentation velocity.
    ! This is equivalent to mulplying -1.
    xyr_FracQMixFlux = sign( 1.0_DP, xyr_SedVel ) * xyr_FracQMixFlux


    xyr_QMixFlux = xyr_IntQMixFlux + xyr_FracQMixFlux


    !
    ! estimate dust mixing ratio at next time step
    !
    do k = 1, kmax
      xyz_DQMixDt(:,:,k) = ( xyr_QMixFlux(:,:,k) - xyr_QMixFlux(:,:,k-1) ) / ( xyr_Press   (:,:,k) - xyr_Press   (:,:,k-1) ) * Grav
    end do


    xyz_QMixA = xyz_QMix + xyz_DQMixDt * 2.0_DP * DelTime

    xyz_QMix  = xyz_QMixA


    if ( present ( xy_SurfGravSedFlux ) ) then
      xy_SurfGravSedFlux = xyr_QMixFlux(:,:,0)
    end if


    ! ヒストリデータ出力
    ! History data output
    !
!!$    call HistoryAutoPut( TimeN, 'Surf'//trim(a_QMixName(n))//'GravSedFlux', &
!!$      & xyrf_QMixFlux(:,:,0,n)  )


  end subroutine GravSed
Subroutine :

[Source]

  subroutine GravSedInit

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! 組成に関わる配列の設定
    ! Settings of array for atmospheric composition
    !
    use composition, only: a_QMixName

    ! 宣言文 ; Declaration statements
    !
    implicit none

!!$    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
!!$                              ! Unit number for NAMELIST file open
!!$    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
!!$                              ! IOSTAT of NAMELIST read

    integer  :: n

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /grav_sed_nml/    &
!!$      & FlagConstDiffCoef,              &
!!$      & ConstDiffCoefM, ConstDiffCoefH, &
!!$!
!!$      & SquareVelMin, BulkRiNumMin,     &
!!$!
!!$      & MixLengthMax, TildeShMin, TildeSmMin, &
!!$      & VelDiffCoefMin, TempDiffCoefMin, QMixDiffCoefMin, &
!!$      & VelDiffCoefMax, TempDiffCoefMax, QMixDiffCoefMax, &
!!$!
!!$      & MYLv2ParamA1, MYLv2ParamB1, MYLv2ParamA2, MYLv2ParamB2, MYLv2ParamC1, &
!!$      & FlagCalcRiWithTv


    ! 実行文 ; Executable statement
    !

    if ( grav_sed_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml, &                   ! (in)
!!$        & nml = grav_sed_nml, &           ! (out)
!!$        & iostat = iostat_nml )           ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$      if ( iostat_nml == 0 ) write( STDOUT, nml = grav_sed_nml )
!!$    end if


    ! ヒストリデータ出力のためのへの変数登録
    ! Register of variables for history data output
    !
!!$    do n = 1, ncmax
!!$      call HistoryAutoAddVariable( 'Surf'//trim(a_QMixName(n))//'GravSedFlux', &
!!$        & (/ 'lon ', 'lat ', 'time' /), &
!!$        & 'surface gravitational sedimentation flux of ' // trim(a_QMixName(n)), &
!!$        & 'kg m-2 s-1' )
!!$    end do


    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    grav_sed_inited = .true.

  end subroutine GravSedInit

Private Instance methods

Function :
aaa_Result(size(aaa_Press,1),size(aaa_Press,2),size(aaa_Press,3)) :real(DP)
MolVisCoef :real(DP), intent(in)
MeanFreePathRef :real(DP), intent(in)
PressLambdaRef :real(DP), intent(in)
PartDen :real(DP), intent(in)
PartDia :real(DP), intent(in)
aaa_Press(:,:,:) :real(DP), intent(in)

[Source]

  function aaa_SedVel( MolVisCoef, MeanFreePathRef, PressLambdaRef, PartDen, PartDia, aaa_Press ) result( aaa_Result )

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: Grav
                              ! $ g $ [m s-2].
                              ! 重力加速度.
                              ! Gravitational acceleration


    real(DP), intent(in) :: MolVisCoef
    real(DP), intent(in) :: MeanFreePathRef
    real(DP), intent(in) :: PressLambdaRef
    real(DP), intent(in) :: PartDen
    real(DP), intent(in) :: PartDia
    real(DP), intent(in) :: aaa_Press(:,:,:)

    real(DP) :: aaa_Result(size(aaa_Press,1),size(aaa_Press,2),size(aaa_Press,3))

    !
    ! local variables
    !
    real(DP) :: aaa_MeanFreePath(size(aaa_Press,1),size(aaa_Press,2),size(aaa_Press,3))


    ! 実行文 ; Executable statement
    !

    aaa_MeanFreePath = MeanFreePathRef * ( PressLambdaRef / aaa_Press )
    aaa_Result = - PartDen * Grav * PartDia**2 / ( 18.0d0 * MolVisCoef ) * ( 1.0d0 + 2.0d0 * aaa_MeanFreePath / PartDia )


  end function aaa_SedVel
grav_sed_inited
Variable :
grav_sed_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
module_name
Constant :
module_name = ‘grav_sed :character(*), parameter
: モジュールの名称. Module name
version
Constant :
version = ’$Name: dcpam5-20140218 $’ // ’$Id: grav_sed.f90,v 1.2 2013-11-06 06:32:27 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version