配列の分割／拡張

Division and expansion of arrays

Methods

SLTTExtArrExt SLTTExtArrExt2 SLTTExtArrInit SLTTExtArrMkJMAXTable SumSinSq a_LCIFUVNP a_LCIFUVSP acoslon1 asinlon1 module_name sum_sinsq version

Included Modules

dc_types gridset composition mpi_wrapper constants0 axesset sltt_const dc_message sltt_lagint

Public Instance methods

SLTTExtArrExt( y_ExtLatS, y_ExtLatN, x_SinLonS, x_CosLonS, x_SinLonN, x_CosLonN, xyzf_QMix, xyz_U, xyz_V, xyzf_ExtDQMixDLatS, xyzf_ExtDQMixDLatN, xyzf_ExtQMixS, xyzf_ExtQMixN, xyz_ExtUS, xyz_ExtUN, xyz_ExtVS, xyz_ExtVN )

*Subroutine* :
`y_ExtLatS(jexmins:jexmaxs)` :	`real(DP), intent(in )`
`y_ExtLatN(jexminn:jexmaxn)` :	`real(DP), intent(in )`
`x_SinLonS(0:imax-1)` :	`real(DP), intent(in )`
`x_CosLonS(0:imax-1)` :	`real(DP), intent(in )`
`x_SinLonN(0:imax-1)` :	`real(DP), intent(in )`
`x_CosLonN(0:imax-1)` :	`real(DP), intent(in )`
`xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)` :	`real(DP), intent(in )`
`xyz_U(0:imax-1, 1:jmax, 1:kmax)` :	`real(DP), intent(in )`
`xyz_V(0:imax-1, 1:jmax, 1:kmax)` :	`real(DP), intent(in )`
`xyzf_ExtDQMixDLatS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax)` :	`real(DP), intent(in )`
`xyzf_ExtDQMixDLatN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax)` :	`real(DP), intent(in )`
`xyzf_ExtQMixS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax)` :	`real(DP), intent(out)`
`xyzf_ExtQMixN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax)` :	`real(DP), intent(out)`
`xyz_ExtUS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax)` :	`real(DP), intent(out)`
`xyz_ExtUN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax)` :	`real(DP), intent(out)`
`xyz_ExtVS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax)` :	`real(DP), intent(out)`
`xyz_ExtVN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax)` :	`real(DP), intent(out)`

[Source]

  subroutine SLTTExtArrExt( y_ExtLatS, y_ExtLatN, x_SinLonS, x_CosLonS, x_SinLonN, x_CosLonN, xyzf_QMix, xyz_U, xyz_V, xyzf_ExtDQMixDLatS, xyzf_ExtDQMixDLatN, xyzf_ExtQMixS, xyzf_ExtQMixN, xyz_ExtUS, xyz_ExtUN, xyz_ExtVS, xyz_ExtVN )

    use mpi_wrapper, only : nprocs, myrank, MPIWrapperISend, MPIWrapperIRecv, MPIWrapperWait
    use sltt_const , only : dtjw, iexmin, iexmax, jexmins, jexmaxs, jexminn, jexmaxn
    use sltt_lagint, only : SLTTIrrHerIntQui1DNonUni

    real(DP), intent(in ) :: y_ExtLatS(jexmins:jexmaxs)
    real(DP), intent(in ) :: y_ExtLatN(jexminn:jexmaxn)
    real(DP), intent(in ) :: x_SinLonS(0:imax-1)
    real(DP), intent(in ) :: x_CosLonS(0:imax-1)
    real(DP), intent(in ) :: x_SinLonN(0:imax-1)
    real(DP), intent(in ) :: x_CosLonN(0:imax-1)
    real(DP), intent(in ) :: xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
    real(DP), intent(in ) :: xyz_U    (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyz_V    (0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(in ) :: xyzf_ExtDQMixDLatS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax)
    real(DP), intent(in ) :: xyzf_ExtDQMixDLatN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax)
    real(DP), intent(out) :: xyzf_ExtQMixS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax)
    real(DP), intent(out) :: xyzf_ExtQMixN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax)
    real(DP), intent(out) :: xyz_ExtUS    (iexmin:iexmax, jexmins:jexmaxs, 1:kmax)
    real(DP), intent(out) :: xyz_ExtUN    (iexmin:iexmax, jexminn:jexmaxn, 1:kmax)
    real(DP), intent(out) :: xyz_ExtVS    (iexmin:iexmax, jexmins:jexmaxs, 1:kmax)
    real(DP), intent(out) :: xyz_ExtVN    (iexmin:iexmax, jexminn:jexmaxn, 1:kmax)


      !
      ! local variables
      !
!!$      !
!!$      ! variables for data transfer using MPI
!!$      !
!!$      real(DP)                :: sendbuf( imax, dtjw, kmax, ntrc+2 )
!!$      real(DP)                :: recvbuf( imax, dtjw, kmax, ntrc+2 )
!!$      integer            :: irec_send, irec_recv
!!$      integer            :: istatus( mpi_status_size )
!!$      integer            :: ierr

    !
    ! variables for estimation of values at poles
    !
    real(DP)                :: Ave
    real(DP)                :: SumC
    real(DP)                :: SumS
!!$    real(DP)                :: &
!!$      hcpif_q_dataz( imax*kmax, 6 ), &
!!$      d1_1d        ( imax*kmax )   , d2_1d( imax*kmax )
!!$    integer            :: mm
!!$
!!$    integer            :: i, j, k, m, n, nt
!!$    integer            :: ii
!!$
!!$
!!$    imaxh = imax / 2
!!$    mm    = imax * kmax


      !
      ! initialization for debug
      !
!!$      ex_gq( :, :, :, : ) = 1.0d100




    integer  :: idest
    integer  :: idep
    integer  :: a_ireq_send(4)
    integer  :: a_ireq_recv(4)
    real(DP), allocatable :: xyza_SendBuf(:,:,:,:,:)
    real(DP), allocatable :: xyza_RecvBuf(:,:,:,:,:)
    real(DP), allocatable :: xyz_USPrev    (:,:,:)
    real(DP), allocatable :: xyz_UNPrev    (:,:,:)
    real(DP), allocatable :: xyz_USNext    (:,:,:)
    real(DP), allocatable :: xyz_UNNext    (:,:,:)
    real(DP), allocatable :: xyz_VSPrev    (:,:,:)
    real(DP), allocatable :: xyz_VNPrev    (:,:,:)
    real(DP), allocatable :: xyz_VSNext    (:,:,:)
    real(DP), allocatable :: xyz_VNNext    (:,:,:)
    real(DP), allocatable :: xyzf_QMixSPrev(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixNPrev(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixSNext(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixNNext(:,:,:,:)

    real(DP) :: h, theta, thetasq

    integer  :: i
    integer  :: j
    integer  :: k
    integer  :: n
    integer  :: ii


    !====================================================================

    allocate( xyza_SendBuf(0:imax-1, 1:dtjw, 1:kmax, 2+ncmax, 4) )
    allocate( xyza_RecvBuf(0:imax-1, 1:dtjw, 1:kmax, 2+ncmax, 4) )
    if ( myrank > 0          ) then
      allocate( xyz_USPrev    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_UNPrev    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_VSPrev    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_VNPrev    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyzf_QMixSPrev(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
      allocate( xyzf_QMixNPrev(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
    end if
    if ( myrank < (nprocs-1) ) then
      allocate( xyz_USNext    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_UNNext    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_VSNext    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyz_VNNext    (0:imax-1, 1:dtjw, 1:kmax) )
      allocate( xyzf_QMixSNext(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
      allocate( xyzf_QMixNNext(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
    end if


    ! y_Array(1:dtjw) values are transfered (y_SPrev).
    !
    if ( myrank < (nprocs-1) ) then
      xyza_SendBuf(:,:,:,1        ,1) = xyz_U    (:,1:dtjw,:)
      xyza_SendBuf(:,:,:,2        ,1) = xyz_V    (:,1:dtjw,:)
      xyza_SendBuf(:,:,:,3:2+ncmax,1) = xyzf_QMix(:,1:dtjw,:,:)
      idest = myrank + 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, 2+ncmax, xyza_SendBuf(:,:,:,:,1), a_ireq_send(1) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, 2+ncmax, xyza_RecvBuf(:,:,:,:,1), a_ireq_recv(1) )
    end if
    !
    ! y_Array(jmax/2+1-dtjw:jmax/2) values are transfered (y_SNext).
    !
    if ( myrank > 0 ) then
      xyza_SendBuf(:,:,:,1        ,2) = xyz_U    (:,jmax/2+1-dtjw:jmax/2,:)
      xyza_SendBuf(:,:,:,2        ,2) = xyz_V    (:,jmax/2+1-dtjw:jmax/2,:)
      xyza_SendBuf(:,:,:,3:2+ncmax,2) = xyzf_QMix(:,jmax/2+1-dtjw:jmax/2,:,:)
      idest = myrank - 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, 2+ncmax, xyza_SendBuf(:,:,:,:,2), a_ireq_send(2) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, 2+ncmax, xyza_RecvBuf(:,:,:,:,2), a_ireq_recv(2) )
    end if
    !
    ! y_Array(jmax/2+1:jmax/2+dtjw) values are transfered (y_NNext).
    !
    if ( myrank > 0 ) then
      xyza_SendBuf(:,:,:,1        ,3) = xyz_U    (:,jmax/2+1:jmax/2+dtjw,:)
      xyza_SendBuf(:,:,:,2        ,3) = xyz_V    (:,jmax/2+1:jmax/2+dtjw,:)
      xyza_SendBuf(:,:,:,3:2+ncmax,3) = xyzf_QMix(:,jmax/2+1:jmax/2+dtjw,:,:)
      idest = myrank - 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, 2+ncmax, xyza_SendBuf(:,:,:,:,3), a_ireq_send(3) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, 2+ncmax, xyza_RecvBuf(:,:,:,:,3), a_ireq_recv(3) )
    end if
    !
    ! y_Array(jmax+1-dtjw:jmax) values are transfered (y_NPrev).
    !
    if ( myrank < (nprocs-1) ) then
      xyza_SendBuf(:,:,:,1        ,4) = xyz_U    (:,jmax+1-dtjw:jmax,:)
      xyza_SendBuf(:,:,:,2        ,4) = xyz_V    (:,jmax+1-dtjw:jmax,:)
      xyza_SendBuf(:,:,:,3:2+ncmax,4) = xyzf_QMix(:,jmax+1-dtjw:jmax,:,:)
      idest = myrank + 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, 2+ncmax, xyza_SendBuf(:,:,:,:,4), a_ireq_send(4) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, 2+ncmax, xyza_RecvBuf(:,:,:,:,4), a_ireq_recv(4) )
    end if

    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(2) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(2) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(4) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(4) )



    ! y_Array(1:dtjw) values are transfered (y_SPrev).
    if ( myrank > 0 ) then
      xyz_USPrev     = xyza_RecvBuf(:,:,:,1        ,1)
      xyz_VSPrev     = xyza_RecvBuf(:,:,:,2        ,1)
      xyzf_QMixSPrev = xyza_RecvBuf(:,:,:,3:2+ncmax,1)
    end if
    ! y_Array(jmax/2+1-dtjw:jmax/2) values are transfered (y_SNext).
    if ( myrank < (nprocs-1) ) then
      xyz_USNext     = xyza_RecvBuf(:,:,:,1        ,2)
      xyz_VSNext     = xyza_RecvBuf(:,:,:,2        ,2)
      xyzf_QMixSNext = xyza_RecvBuf(:,:,:,3:2+ncmax,2)
    end if
    ! y_Array(jmax/2+1:jmax/2+dtjw) values are transfered (y_NNext).
    if ( myrank < (nprocs-1) ) then
      xyz_UNNext     = xyza_RecvBuf(:,:,:,1        ,3)
      xyz_VNNext     = xyza_RecvBuf(:,:,:,2        ,3)
      xyzf_QMixNNext = xyza_RecvBuf(:,:,:,3:2+ncmax,3)
    end if
    ! y_Array(jmax+1-dtjw:jmax) values are transfered (y_NPrev).
    if ( myrank > 0 ) then
      xyz_UNPrev     = xyza_RecvBuf(:,:,:,1        ,4)
      xyz_VNPrev     = xyza_RecvBuf(:,:,:,2        ,4)
      xyzf_QMixNPrev = xyza_RecvBuf(:,:,:,3:2+ncmax,4)
    end if



    do k = 1, kmax
      do j = 1, jmax/2
        do i = 0, imax-1
          xyz_ExtUS(i,j,k) = xyz_U(i,j       ,k)
          xyz_ExtUN(i,j,k) = xyz_U(i,j+jmax/2,k)
          xyz_ExtVS(i,j,k) = xyz_V(i,j       ,k)
          xyz_ExtVN(i,j,k) = xyz_V(i,j+jmax/2,k)
        end do
      end do
    end do
    do n = 1, ncmax
      do k = 1, kmax
        do j = 1, jmax/2
          do i = 0, imax-1
            xyzf_ExtQMixS(i,j,k,n) = xyzf_QMix(i,j       ,k,n)
            xyzf_ExtQMixN(i,j,k,n) = xyzf_QMix(i,j+jmax/2,k,n)
          end do
        end do
      end do
    end do


    ! southern edge of southern array
    if( myrank == (nprocs-1) ) then
      ! values at south pole
      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax/2-1
            ii = i + imax/2
            xyz_ExtUS(ii,0-j,k) = - xyz_ExtUS(i,j,k)
            xyz_ExtVS(ii,0-j,k) = - xyz_ExtVS(i,j,k)
          end do
          do i = imax/2, imax-1
            ii = i - imax/2
            xyz_ExtUS(ii,0-j,k) = - xyz_ExtUS(i,j,k)
            xyz_ExtVS(ii,0-j,k) = - xyz_ExtVS(i,j,k)
          end do
        end do
      end do
      do k = 1, kmax
        do i = 0, imax-1
          ! quadratic interpolation (old)
!!$          xyz_ExtUS(i,0,k) =                       &
!!$            &   a_LQIFUVSP(-1) * xyz_ExtUS(i,-1,k) &
!!$            & + a_LQIFUVSP( 1) * xyz_ExtUS(i, 1,k) &
!!$            & + a_LQIFUVSP( 2) * xyz_ExtUS(i, 2,k)
!!$          xyz_ExtVS(i,0,k) =                       &
!!$            &   a_LQIFUVSP(-1) * xyz_ExtVS(i,-1,k) &
!!$            & + a_LQIFUVSP( 1) * xyz_ExtVS(i, 1,k) &
!!$            & + a_LQIFUVSP( 2) * xyz_ExtVS(i, 2,k)
          ! cubic interpolation
          xyz_ExtUS(i,0,k) = a_LCIFUVSP(-2) * xyz_ExtUS(i,-2,k) + a_LCIFUVSP(-1) * xyz_ExtUS(i,-1,k) + a_LCIFUVSP( 1) * xyz_ExtUS(i, 1,k) + a_LCIFUVSP( 2) * xyz_ExtUS(i, 2,k)
          xyz_ExtVS(i,0,k) = a_LCIFUVSP(-2) * xyz_ExtVS(i,-2,k) + a_LCIFUVSP(-1) * xyz_ExtVS(i,-1,k) + a_LCIFUVSP( 1) * xyz_ExtVS(i, 1,k) + a_LCIFUVSP( 2) * xyz_ExtVS(i, 2,k)
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax/2-1
              ii = i + imax/2
              xyzf_ExtQMixS(ii,0-j,k,n) = xyzf_ExtQMixS(i,j,k,n)
            end do
            do i = imax/2, imax-1
              ii = i - imax/2
              xyzf_ExtQMixS(ii,0-j,k,n) = xyzf_ExtQMixS(i,j,k,n)
            end do
          end do
        end do
        do k = 1, kmax
          do i = 0, imax-1
          ! quadratic interpolation (old)
!!$            xyzf_ExtQMixS(i,0,k,n) =                         &
!!$              &   a_LQIFUVSP(-1) * xyzf_ExtQMixS(i,-1,k,n) &
!!$              & + a_LQIFUVSP( 1) * xyzf_ExtQMixS(i, 1,k,n) &
!!$              & + a_LQIFUVSP( 2) * xyzf_ExtQMixS(i, 2,k,n)
!!$          ! cubic interpolation
!!$            xyzf_ExtQMixS(i,0,k,n) =                       &
!!$              &   a_LCIFUVSP(-2) * xyzf_ExtQMixS(i,-2,k,n) &
!!$              & + a_LCIFUVSP(-1) * xyzf_ExtQMixS(i,-1,k,n) &
!!$              & + a_LCIFUVSP( 1) * xyzf_ExtQMixS(i, 1,k,n) &
!!$              & + a_LCIFUVSP( 2) * xyzf_ExtQMixS(i, 2,k,n)
!!$
            ! Polar value estimated by 1D Hermite Quintic Interpolation
            xyzf_ExtQMixS(i,0,k,n) = SLTTIrrHerIntQui1DNonUni ( xyzf_ExtQMixS(i,-2,k,n), xyzf_ExtQMixS(i,-1,k,n), xyzf_ExtQMixS(i, 1,k,n), xyzf_ExtQMixS(i, 2,k,n), xyzf_ExtDQMixDLatS(i,-1,k,n), xyzf_ExtDQMixDLatS(i, 1,k,n), y_ExtLatS(-2)-y_ExtLatS(-1), y_ExtLatS( 1)-y_ExtLatS(-1), y_ExtLatS( 2)-y_ExtLatS(-1), y_ExtLatS( 0)-y_ExtLatS(-1) )

          end do
        end do
      end do

      ! only wavenumber 1 component is retained for zonal and meridional 
      ! wind velocities
      j = 0
      do k = 1, kmax
        SumC = 0.0_DP
        SumS = 0.0_DP
        do i = 0, imax-1
          SumC = SumC + xyz_ExtUS(i,j,k) * x_CosLonS(i)
          SumS = SumS + xyz_ExtUS(i,j,k) * x_SinLonS(i)
        end do
        SumC = SumC / SumSinSq
        SumS = SumS / SumSinSq
        do i = 0, imax-1
          xyz_ExtUS(i,j,k) = SumC * x_CosLonS(i) + SumS * x_SinLonS(i)
        end do
      end do
      do k = 1, kmax
        SumC = 0.0_DP
        SumS = 0.0_DP
        do i = 0, imax-1
          SumC = SumC + xyz_ExtVS(i,j,k) * x_CosLonS(i)
          SumS = SumS + xyz_ExtVS(i,j,k) * x_SinLonS(i)
        end do
        SumC = SumC / SumSinSq
        SumS = SumS / SumSinSq
        do i = 0, imax-1
          xyz_ExtVS(i,j,k) = SumC * x_CosLonS(i) + SumS * x_SinLonS(i)
        end do
      end do
      ! zonal average is set for mixing ratio
      j = 0
      do n = 1, ncmax
        do k = 1, kmax
          Ave = 0.0_DP
          do i = 0, imax-1
            Ave = Ave + xyzf_ExtQMixS(i,j,k,n)
          end do
          Ave = Ave / dble( imax )
          do i = 0, imax-1
            xyzf_ExtQMixS(i,j,k,n) = Ave
          end do
        end do
      end do

    else

      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUS(i,1-j,k) = xyz_USNext(i,dtjw-(j-1),k)
            xyz_ExtVS(i,1-j,k) = xyz_VSNext(i,dtjw-(j-1),k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,1-j,k,n) = xyzf_QMixSNext(i,dtjw-(j-1),k,n)
            end do
          end do
        end do
      end do
    end if
    ! northern edge of southern array
    if ( myrank == 0 ) then
      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUS(i,jmax/2+j,k) = xyz_ExtUN(i,j,k)
            xyz_ExtVS(i,jmax/2+j,k) = xyz_ExtVN(i,j,k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,jmax/2+j,k,n) = xyzf_ExtQMixN(i,j,k,n)
            end do
          end do
        end do
      end do
    else
      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUS(i,jmax/2+j,k) = xyz_USPrev(i,j,k)
            xyz_ExtVS(i,jmax/2+j,k) = xyz_VSPrev(i,j,k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,jmax/2+j,k,n) = xyzf_QMixSPrev(i,j,k,n)
            end do
          end do
        end do
      end do
    end if
    !
    ! southern edge of northern array
    if ( myrank == 0 ) then
      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUN(i,1-j,k) = xyz_ExtUS(i,jmax/2-(j-1),k)
            xyz_ExtVN(i,1-j,k) = xyz_ExtVS(i,jmax/2-(j-1),k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,1-j,k,n) = xyzf_ExtQMixS(i,jmax/2-(j-1),k,n)
            end do
          end do
        end do
      end do
    else
      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUN(i,1-j,k) = xyz_UNPrev(i,dtjw-(j-1),k)
            xyz_ExtVN(i,1-j,k) = xyz_VNPrev(i,dtjw-(j-1),k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,1-j,k,n) = xyzf_QMixNPrev(i,dtjw-(j-1),k,n)
            end do
          end do
        end do
      end do
    end if
    ! northern edge of northern array
    if( myrank == (nprocs-1) ) then
      ! values at north pole

      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax/2-1
            ii = i + imax/2
            xyz_ExtUN(ii,jmax/2+1+j,k) = - xyz_ExtUN(i,jmax/2+1-j,k)
            xyz_ExtVN(ii,jmax/2+1+j,k) = - xyz_ExtVN(i,jmax/2+1-j,k)
          end do
          do i = imax/2, imax-1
            ii = i - imax/2
            xyz_ExtUN(ii,jmax/2+1+j,k) = - xyz_ExtUN(i,jmax/2+1-j,k)
            xyz_ExtVN(ii,jmax/2+1+j,k) = - xyz_ExtVN(i,jmax/2+1-j,k)
          end do
        end do
      end do
      do k = 1, kmax
        do i = 0, imax-1
          ! quadratic interpolation (old)
!!$          xyz_ExtUN(i,jmax/2+1,k) =                              &
!!$            &   a_LQIFUVNP(jmax/2-1) * xyz_ExtUN(i,jmax/2-1,k) &
!!$            & + a_LQIFUVNP(jmax/2  ) * xyz_ExtUN(i,jmax/2  ,k) &
!!$            & + a_LQIFUVNP(jmax/2+2) * xyz_ExtUN(i,jmax/2+2,k)
!!$          xyz_ExtVN(i,jmax/2+1,k) =                              &
!!$            &   a_LQIFUVNP(jmax/2-1) * xyz_ExtVN(i,jmax/2-1,k) &
!!$            & + a_LQIFUVNP(jmax/2  ) * xyz_ExtVN(i,jmax/2  ,k) &
!!$            & + a_LQIFUVNP(jmax/2+2) * xyz_ExtVN(i,jmax/2+2,k)
          ! qcubic interpolation
          xyz_ExtUN(i,jmax/2+1,k) = a_LCIFUVNP(jmax/2-1) * xyz_ExtUN(i,jmax/2-1,k) + a_LCIFUVNP(jmax/2  ) * xyz_ExtUN(i,jmax/2  ,k) + a_LCIFUVNP(jmax/2+2) * xyz_ExtUN(i,jmax/2+2,k) + a_LCIFUVNP(jmax/2+3) * xyz_ExtUN(i,jmax/2+3,k)
          xyz_ExtVN(i,jmax/2+1,k) = a_LCIFUVNP(jmax/2-1) * xyz_ExtVN(i,jmax/2-1,k) + a_LCIFUVNP(jmax/2  ) * xyz_ExtVN(i,jmax/2  ,k) + a_LCIFUVNP(jmax/2+2) * xyz_ExtVN(i,jmax/2+2,k) + a_LCIFUVNP(jmax/2+3) * xyz_ExtVN(i,jmax/2+3,k)
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax/2-1
              ii = i + imax/2
              xyzf_ExtQMixN(ii,jmax/2+1+j,k,n) = xyzf_ExtQMixN(i,jmax/2+1-j,k,n)
            end do
            do i = imax/2, imax-1
              ii = i - imax/2
              xyzf_ExtQMixN(ii,jmax/2+1+j,k,n) = xyzf_ExtQMixN(i,jmax/2+1-j,k,n)
            end do
          end do
        end do
        do k = 1, kmax
          do i = 0, imax-1
!!$          ! quadratic interpolation (old)
!!$            xyzf_ExtQMixN(i,jmax/2+1,k,n) =                              &
!!$              &   a_LQIFUVNP(jmax/2-1) * xyzf_ExtQMixN(i,jmax/2-1,k,n) &
!!$              & + a_LQIFUVNP(jmax/2  ) * xyzf_ExtQMixN(i,jmax/2  ,k,n) &
!!$              & + a_LQIFUVNP(jmax/2+2) * xyzf_ExtQMixN(i,jmax/2+2,k,n)
!!$          ! cubic interpolation
!!$            xyzf_ExtQMixN(i,jmax/2+1,k,n) =                            &
!!$              &   a_LCIFUVNP(jmax/2-1) * xyzf_ExtQMixN(i,jmax/2-1,k,n) &
!!$              & + a_LCIFUVNP(jmax/2  ) * xyzf_ExtQMixN(i,jmax/2  ,k,n) &
!!$              & + a_LCIFUVNP(jmax/2+2) * xyzf_ExtQMixN(i,jmax/2+2,k,n) &
!!$              & + a_LCIFUVNP(jmax/2+3) * xyzf_ExtQMixN(i,jmax/2+3,k,n)
!!$
            ! Polar value estimated by 1D Hermite Quintic Interpolation
            xyzf_ExtQMixN(i,jmax/2+1,k,n) = SLTTIrrHerIntQui1DNonUni ( xyzf_ExtQMixN(i,jmax/2-1,k,n), xyzf_ExtQMixN(i,jmax/2  ,k,n), xyzf_ExtQMixN(i,jmax/2+2,k,n), xyzf_ExtQMixN(i,jmax/2+3,k,n), xyzf_ExtDQMixDLatN(i,jmax/2  ,k,n), xyzf_ExtDQMixDLatN(i,jmax/2+2,k,n), y_ExtLatN(jmax/2-1)-y_ExtLatN(jmax/2  ), y_ExtLatN(jmax/2+2)-y_ExtLatN(jmax/2  ), y_ExtLatN(jmax/2+3)-y_ExtLatN(jmax/2  ), y_ExtLatN(jmax/2+1)-y_ExtLatN(jmax/2  ) )
          end do
        end do
      end do

      ! only wavenumber 1 component is retained for zonal and meridional 
      ! wind velocities
      j = jmax/2+1
      do k = 1, kmax
        SumC = 0.0_DP
        SumS = 0.0_DP
        do i = 0, imax-1
          SumC = SumC + xyz_ExtUN(i,j,k) * x_CosLonN(i)
          SumS = SumS + xyz_ExtUN(i,j,k) * x_SinLonN(i)
        end do
        SumC = SumC / SumSinSq
        SumS = SumS / SumSinSq
        do i = 0, imax-1
          xyz_ExtUN(i,j,k) = SumC * x_CosLonN(i) + SumS * x_SinLonN(i)
        end do
      end do
      do k = 1, kmax
        SumC = 0.0_DP
        SumS = 0.0_DP
        do i = 0, imax-1
          SumC = SumC + xyz_ExtVN(i,j,k) * x_CosLonN(i)
          SumS = SumS + xyz_ExtVN(i,j,k) * x_SinLonN(i)
        end do
        SumC = SumC / SumSinSq
        SumS = SumS / SumSinSq
        do i = 0, imax-1
          xyz_ExtVN(i,j,k) = SumC * x_CosLonN(i) + SumS * x_SinLonN(i)
        end do
      end do
      ! zonal average is set for mixing ratio
      j = jmax/2+1
      do n = 1, ncmax
        do k = 1, kmax
          Ave = 0.0_DP
          do i = 0, imax-1
            Ave = Ave + xyzf_ExtQMixN(i,j,k,n)
          end do
          Ave = Ave / dble( imax )
          do i = 0, imax-1
            xyzf_ExtQMixN(i,j,k,n) = Ave
          end do
        end do
      end do

    else

      do k = 1, kmax
        do j = 1, dtjw
          do i = 0, imax-1
            xyz_ExtUN(i,jmax/2+j,k) = xyz_UNNext(i,j,k)
            xyz_ExtVN(i,jmax/2+j,k) = xyz_VNNext(i,j,k)
          end do
        end do
      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,jmax/2+j,k,n) = xyzf_QMixNNext(i,j,k,n)
            end do
          end do
        end do
      end do
    end if

    deallocate( xyza_SendBuf )
    deallocate( xyza_RecvBuf )
    if ( myrank > 0          ) then
      deallocate( xyz_USPrev     )
      deallocate( xyz_UNPrev     )
      deallocate( xyz_VSPrev     )
      deallocate( xyz_VNPrev     )
      deallocate( xyzf_QMixSPrev )
      deallocate( xyzf_QMixNPrev )
    end if
    if ( myrank < (nprocs-1) ) then
      deallocate( xyz_USNext     )
      deallocate( xyz_UNNext     )
      deallocate( xyz_VSNext     )
      deallocate( xyz_VNNext     )
      deallocate( xyzf_QMixSNext )
      deallocate( xyzf_QMixNNext )
    end if



    !===========================================
    ! set values at longitudinal edge
    !-------------------------------------------
    do k = 1, kmax
      do j = jexmins, jexmaxs
        do i = iexmin, 0-1
          xyz_ExtUS(i,j,k) = xyz_ExtUS(imax+i,j,k)
          xyz_ExtVS(i,j,k) = xyz_ExtVS(imax+i,j,k)
        end do
        do i = imax-1+1, iexmax
          xyz_ExtUS(i,j,k) = xyz_ExtUS(i-imax,j,k)
          xyz_ExtVS(i,j,k) = xyz_ExtVS(i-imax,j,k)
        end do
      end do
      do j = jexminn, jexmaxn
        do i = iexmin, 0-1
          xyz_ExtUN(i,j,k) = xyz_ExtUN(imax+i,j,k)
          xyz_ExtVN(i,j,k) = xyz_ExtVN(imax+i,j,k)
        end do
        do i = imax-1+1, iexmax
          xyz_ExtUN(i,j,k) = xyz_ExtUN(i-imax,j,k)
          xyz_ExtVN(i,j,k) = xyz_ExtVN(i-imax,j,k)
        end do
      end do
    end do
    do n = 1, ncmax
      do k = 1, kmax
        do j = jexmins, jexmaxs
          do i = iexmin, 0-1
            xyzf_ExtQMixS(i,j,k,n) = xyzf_ExtQMixS(imax+i,j,k,n)
          end do
          do i = imax-1+1, iexmax
            xyzf_ExtQMixS(i,j,k,n) = xyzf_ExtQMixS(i-imax,j,k,n)
          end do
        end do
        do j = jexminn, jexmaxn
          do i = iexmin, 0-1
            xyzf_ExtQMixN(i,j,k,n) = xyzf_ExtQMixN(imax+i,j,k,n)
          end do
          do i = imax-1+1, iexmax
            xyzf_ExtQMixN(i,j,k,n) = xyzf_ExtQMixN(i-imax,j,k,n)
          end do
        end do
      end do
    end do


  end subroutine SLTTExtArrExt

SLTTExtArrExt2( x_SinLonS, x_CosLonS, x_SinLonN, x_CosLonN, xyzf_QMix, pm, xyzf_ExtQMixS, xyzf_ExtQMixN, PoleMethod )

Subroutine :

x_SinLonS(0:imax-1) : real(DP), intent(in )

x_CosLonS(0:imax-1) : real(DP), intent(in )

x_SinLonN(0:imax-1) : real(DP), intent(in )

x_CosLonN(0:imax-1) : real(DP), intent(in )

xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax) : real(DP), intent(in )

pm :

real(DP), intent(in )

:	配列拡張する際、極ごえ後に符号が変わる場合は -1.0を与える。そうでない場合は1.0を与える。

xyzf_ExtQMixS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax) : real(DP), intent(out)

xyzf_ExtQMixN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax) : real(DP), intent(out)

PoleMethod :

character(*), intent(in )

:	"Mean" : Longitudinal mean "Wave1" : Only wave 1 is retained.

[Source]

  subroutine SLTTExtArrExt2( x_SinLonS, x_CosLonS, x_SinLonN, x_CosLonN, xyzf_QMix, pm, xyzf_ExtQMixS, xyzf_ExtQMixN, PoleMethod )

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify

    use mpi_wrapper, only : nprocs, myrank, MPIWrapperISend, MPIWrapperIRecv, MPIWrapperWait
    use sltt_const , only : dtjw, iexmin, iexmax, jexmins, jexmaxs, jexminn, jexmaxn

    real(DP), intent(in ) :: x_SinLonS(0:imax-1)
    real(DP), intent(in ) :: x_CosLonS(0:imax-1)
    real(DP), intent(in ) :: x_SinLonN(0:imax-1)
    real(DP), intent(in ) :: x_CosLonN(0:imax-1)
    real(DP), intent(in ) :: xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
    real(DP), intent(in ) :: pm   ! 配列拡張する際、極ごえ後に符号が変わる場合は -1.0を与える。そうでない場合は1.0を与える。
    real(DP), intent(out) :: xyzf_ExtQMixS(iexmin:iexmax, jexmins:jexmaxs, 1:kmax, 1:ncmax)
    real(DP), intent(out) :: xyzf_ExtQMixN(iexmin:iexmax, jexminn:jexmaxn, 1:kmax, 1:ncmax)
    character(*), intent(in ) :: PoleMethod
                                   ! "Mean"  : Longitudinal mean
                                   ! "Wave1" : Only wave #1 is retained.

    !
    ! local variables
    !
    !
    ! variables for estimation of values at poles
    !
    real(DP)                :: Ave
    real(DP)                :: SumC
    real(DP)                :: SumS


    integer  :: idest
    integer  :: idep
    integer  :: a_ireq_send(4)
    integer  :: a_ireq_recv(4)
    real(DP), allocatable :: xyza_SendBuf(:,:,:,:,:)
    real(DP), allocatable :: xyza_RecvBuf(:,:,:,:,:)
    real(DP), allocatable :: xyzf_QMixSPrev(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixNPrev(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixSNext(:,:,:,:)
    real(DP), allocatable :: xyzf_QMixNNext(:,:,:,:)

    real(DP) :: h, theta, thetasq

    integer  :: i
    integer  :: j
    integer  :: k
    integer  :: n
    integer  :: ii


    !====================================================================

    allocate( xyza_SendBuf(0:imax-1, 1:dtjw, 1:kmax, ncmax, 4) )
    allocate( xyza_RecvBuf(0:imax-1, 1:dtjw, 1:kmax, ncmax, 4) )
    if ( myrank > 0          ) then
      allocate( xyzf_QMixSPrev(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
      allocate( xyzf_QMixNPrev(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
    end if
    if ( myrank < (nprocs-1) ) then
      allocate( xyzf_QMixSNext(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
      allocate( xyzf_QMixNNext(0:imax-1, 1:dtjw, 1:kmax, ncmax) )
    end if


    ! y_Array(1:dtjw) values are transfered (y_SPrev).
    !
    if ( myrank < (nprocs-1) ) then
      xyza_SendBuf(:,:,:,:,1) = xyzf_QMix(:,1:dtjw,:,:)
      idest = myrank + 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, ncmax, xyza_SendBuf(:,:,:,:,1), a_ireq_send(1) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, ncmax, xyza_RecvBuf(:,:,:,:,1), a_ireq_recv(1) )
    end if
    !
    ! y_Array(jmax/2+1-dtjw:jmax/2) values are transfered (y_SNext).
    !
    if ( myrank > 0 ) then
      xyza_SendBuf(:,:,:,:,2) = xyzf_QMix(:,jmax/2+1-dtjw:jmax/2,:,:)
      idest = myrank - 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, ncmax, xyza_SendBuf(:,:,:,:,2), a_ireq_send(2) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, ncmax, xyza_RecvBuf(:,:,:,:,2), a_ireq_recv(2) )
    end if
    !
    ! y_Array(jmax/2+1:jmax/2+dtjw) values are transfered (y_NNext).
    !
    if ( myrank > 0 ) then
      xyza_SendBuf(:,:,:,:,3) = xyzf_QMix(:,jmax/2+1:jmax/2+dtjw,:,:)
      idest = myrank - 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, ncmax, xyza_SendBuf(:,:,:,:,3), a_ireq_send(3) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, ncmax, xyza_RecvBuf(:,:,:,:,3), a_ireq_recv(3) )
    end if
    !
    ! y_Array(jmax+1-dtjw:jmax) values are transfered (y_NPrev).
    !
    if ( myrank < (nprocs-1) ) then
      xyza_SendBuf(:,:,:,:,4) = xyzf_QMix(:,jmax+1-dtjw:jmax,:,:)
      idest = myrank + 1
      call MPIWrapperISend( idest, imax, dtjw, kmax, ncmax, xyza_SendBuf(:,:,:,:,4), a_ireq_send(4) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, imax, dtjw, kmax, ncmax, xyza_RecvBuf(:,:,:,:,4), a_ireq_recv(4) )
    end if

    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(2) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(2) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(4) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(4) )


    ! y_Array(1:dtjw) values are transfered (y_SPrev).
    if ( myrank > 0 ) then
      xyzf_QMixSPrev = xyza_RecvBuf(:,:,:,:,1)
    end if
    ! y_Array(jmax/2+1-dtjw:jmax/2) values are transfered (y_SNext).
    if ( myrank < (nprocs-1) ) then
      xyzf_QMixSNext = xyza_RecvBuf(:,:,:,:,2)
    end if
    ! y_Array(jmax/2+1:jmax/2+dtjw) values are transfered (y_NNext).
    if ( myrank < (nprocs-1) ) then
      xyzf_QMixNNext = xyza_RecvBuf(:,:,:,:,3)
    end if
    ! y_Array(jmax+1-dtjw:jmax) values are transfered (y_NPrev).
    if ( myrank > 0 ) then
      xyzf_QMixNPrev = xyza_RecvBuf(:,:,:,:,4)
    end if


    do n = 1, ncmax
      do k = 1, kmax
        do j = 1, jmax/2
          do i = 0, imax-1
            xyzf_ExtQMixS(i,j,k,n) = xyzf_QMix(i,j       ,k,n)
            xyzf_ExtQMixN(i,j,k,n) = xyzf_QMix(i,j+jmax/2,k,n)
          end do
        end do
      end do
    end do


    ! southern edge of southern array
    if( myrank == (nprocs-1) ) then
      ! values at south pole

      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax/2-1
              ii = i + imax/2
              xyzf_ExtQMixS(ii,0-j,k,n) = pm * xyzf_ExtQMixS(i,j,k,n)
            end do
            do i = imax/2, imax-1
              ii = i - imax/2
              xyzf_ExtQMixS(ii,0-j,k,n) = pm * xyzf_ExtQMixS(i,j,k,n)
            end do
          end do
        end do
        do k = 1, kmax
          do i = 0, imax-1
!!$            xyzf_ExtQMixS(i,0,k,n) =                       & !南極点の値
!!$              &   a_LQIFUVSP(-1) * xyzf_ExtQMixS(i,-1,k,n) &
!!$              & + a_LQIFUVSP( 1) * xyzf_ExtQMixS(i, 1,k,n) &
!!$              & + a_LQIFUVSP( 2) * xyzf_ExtQMixS(i, 2,k,n)
            xyzf_ExtQMixS(i,0,k,n) = a_LCIFUVSP(-2) * xyzf_ExtQMixS(i,-2,k,n) + a_LCIFUVSP(-1) * xyzf_ExtQMixS(i,-1,k,n) + a_LCIFUVSP( 1) * xyzf_ExtQMixS(i, 1,k,n) + a_LCIFUVSP( 2) * xyzf_ExtQMixS(i, 2,k,n)
          end do
        end do
      end do

      select case ( PoleMethod )
      case ( "Mean" )
        ! Longitudinal mean
        j = 0
        do n = 1, ncmax
          do k = 1, kmax
            Ave = 0.0_DP
            do i = 0, imax-1
              Ave = Ave + xyzf_ExtQMixS(i,j,k,n)
            end do
            Ave = Ave / dble( imax )
            do i = 0, imax-1
              xyzf_ExtQMixS(i,j,k,n) = Ave !!南極点の値を各iで統一する。
            end do
          end do
        end do
      case ( "Wave1" )
        ! Only wave #1 is retained.
        j = 0
        do n = 1, ncmax
          do k = 1, kmax
            SumC = 0.0_DP
            SumS = 0.0_DP
            do i = 0, imax-1
              SumC = SumC + xyzf_ExtQMixS(i,j,k,n) * x_CosLonS(i)
              SumS = SumS + xyzf_ExtQMixS(i,j,k,n) * x_SinLonS(i)
            end do
            SumC = SumC / SumSinSq
            SumS = SumS / SumSinSq
            do i = 0, imax-1
              xyzf_ExtQMixS(i,j,k,n) = SumC * x_CosLonS(i) + SumS * x_SinLonS(i)
            end do
          end do
        end do
      case default
        call MessageNotify( 'E', module_name, 'PoleMethod of %c is inappropriate.', c1 = trim(PoleMethod) )
      end select

    else
!!$      do j = 1, jew
!!$        y_ExtLatS(1-j) = y_LatSNext(jew-(j-1))
!!$      end do
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,1-j,k,n) = xyzf_QMixSNext(i,dtjw-(j-1),k,n)
            end do
          end do
        end do
      end do
    end if
    ! northern edge of southern array
    if ( myrank == 0 ) then
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,jmax/2+j,k,n) = xyzf_ExtQMixN(i,j,k,n)
            end do
          end do
        end do
      end do
    else
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixS(i,jmax/2+j,k,n) = xyzf_QMixSPrev(i,j,k,n)
            end do
          end do
        end do
      end do
    end if
    !
    ! southern edge of northern array
    if ( myrank == 0 ) then
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,-j+1,k,n) = xyzf_ExtQMixS(i,jmax/2-(j-1),k,n)
            end do
          end do
        end do
      end do
    else
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,-j+1,k,n) = xyzf_QMixNPrev(i,dtjw-(j-1),k,n)
            end do
          end do
        end do
      end do
    end if

    ! northern edge of northern array
    if( myrank == (nprocs-1) ) then
      ! values at north pole

      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax/2-1
              ii = i + imax/2
              xyzf_ExtQMixN(ii,jmax/2+1+j,k,n) = pm * xyzf_ExtQMixN(i,jmax/2+1-j,k,n)
            end do
            do i = imax/2, imax-1
              ii = i - imax/2
              xyzf_ExtQMixN(ii,jmax/2+1+j,k,n) = pm * xyzf_ExtQMixN(i,jmax/2+1-j,k,n)
            end do
          end do
        end do
        do k = 1, kmax
          do i = 0, imax-1
!!$            xyzf_ExtQMixN(i,jmax/2+1,k,n) =                            & !北極点での値
!!$              &   a_LQIFUVNP(jmax/2-1) * xyzf_ExtQMixN(i,jmax/2-1,k,n) &
!!$              & + a_LQIFUVNP(jmax/2  ) * xyzf_ExtQMixN(i,jmax/2  ,k,n) &
!!$              & + a_LQIFUVNP(jmax/2+2) * xyzf_ExtQMixN(i,jmax/2+2,k,n)
            xyzf_ExtQMixN(i,jmax/2+1,k,n) = a_LCIFUVNP(jmax/2-1) * xyzf_ExtQMixN(i,jmax/2-1,k,n) + a_LCIFUVNP(jmax/2  ) * xyzf_ExtQMixN(i,jmax/2  ,k,n) + a_LCIFUVNP(jmax/2+2) * xyzf_ExtQMixN(i,jmax/2+2,k,n) + a_LCIFUVNP(jmax/2+3) * xyzf_ExtQMixN(i,jmax/2+3,k,n)
          end do
        end do
      end do

      select case ( PoleMethod )
      case ( "Mean" )
        ! Longitudinal mean
        j = jmax/2+1
        do n = 1, ncmax
          do k = 1, kmax
            Ave = 0.0_DP
            do i = 0, imax-1
              Ave = Ave + xyzf_ExtQMixN(i,j,k,n)
            end do
            Ave = Ave / dble( imax )
            do i = 0, imax-1
              xyzf_ExtQMixN(i,j,k,n) = Ave !値を各iで統一する。
            end do
          end do
        end do
      case ( "Wave1" )
        ! Only wave #1 is retained.
        j = jmax/2+1
        do n = 1, ncmax
          do k = 1, kmax
            SumC = 0.0_DP
            SumS = 0.0_DP
            do i = 0, imax-1
              SumC = SumC + xyzf_ExtQMixN(i,j,k,n) * x_CosLonN(i)
              SumS = SumS + xyzf_ExtQMixN(i,j,k,n) * x_SinLonN(i)
            end do
            SumC = SumC / SumSinSq
            SumS = SumS / SumSinSq
            do i = 0, imax-1
              xyzf_ExtQMixN(i,j,k,n) = SumC * x_CosLonN(i) + SumS * x_SinLonN(i)
            end do
          end do
        end do
      case default
        call MessageNotify( 'E', module_name, 'PoleMethod of %c is inappropriate.', c1 = trim(PoleMethod) )
      end select

    else
      do n = 1, ncmax
        do k = 1, kmax
          do j = 1, dtjw
            do i = 0, imax-1
              xyzf_ExtQMixN(i,jmax/2+j,k,n) = xyzf_QMixNNext(i,j,k,n)
            end do
          end do
        end do
      end do
    end if

    deallocate( xyza_SendBuf )
    deallocate( xyza_RecvBuf )
    if ( myrank > 0          ) then
      deallocate( xyzf_QMixSPrev )
      deallocate( xyzf_QMixNPrev )
    end if
    if ( myrank < (nprocs-1) ) then
      deallocate( xyzf_QMixSNext )
      deallocate( xyzf_QMixNNext )
    end if



    !===========================================
    ! set values at longitudinal edge
    !-------------------------------------------
    do n = 1, ncmax
      do k = 1, kmax
        do j = jexmins, jexmaxs
          do i = iexmin, 0-1
            xyzf_ExtQMixS(i,j,k,n) = xyzf_ExtQMixS(imax+i,j,k,n)
          end do
          do i = imax-1+1, iexmax
            xyzf_ExtQMixS(i,j,k,n) = xyzf_ExtQMixS(i-imax,j,k,n)
          end do
        end do
        do j = jexminn, jexmaxn
          do i = iexmin, 0-1
            xyzf_ExtQMixN(i,j,k,n) = xyzf_ExtQMixN(imax+i,j,k,n)
          end do
          do i = imax-1+1, iexmax
            xyzf_ExtQMixN(i,j,k,n) = xyzf_ExtQMixN(i-imax,j,k,n)
          end do
        end do
      end do
    end do


  end subroutine SLTTExtArrExt2

SLTTExtArrInit( x_LonS, y_LatS, x_LonN, y_LatN, x_ExtLonS, y_ExtLatS, x_ExtLonN, y_ExtLatN )

*Subroutine* :
`x_LonS( 0:imax-1 )` :	`real(DP), intent(in )`
`y_LatS( 1:jmax/2 )` :	`real(DP), intent(in )`
`x_LonN( 0:imax-1 )` :	`real(DP), intent(in )`
`y_LatN( 1:jmax/2 )` :	`real(DP), intent(in )`
`x_ExtLonS(iexmin :iexmax )` :	`real(DP), intent(out)`
`y_ExtLatS(jexmins:jexmaxs)` :	`real(DP), intent(out)`
`x_ExtLonN(iexmin :iexmax )` :	`real(DP), intent(out)`
`y_ExtLatN(jexminn:jexmaxn)` :	`real(DP), intent(out)`

[Source]

  subroutine SLTTExtArrInit( x_LonS, y_LatS, x_LonN, y_LatN, x_ExtLonS, y_ExtLatS, x_ExtLonN, y_ExtLatN )

    !
    ! MPI
    !
    use mpi_wrapper   , only : myrank, nprocs, MPIWrapperISend, MPIWrapperIRecv, MPIWrapperWait

    use constants0, only : PI
    use axesset   , only : y_Lat
    use sltt_const, only : PIx2, PIH, dtjw, iexmin, iexmax, jexmins, jexmaxs, jexminn, jexmaxn

    real(DP), intent(in ) :: x_LonS   (   0:imax-1    )
    real(DP), intent(in ) :: y_LatS   (   1:jmax/2    )
    real(DP), intent(in ) :: x_LonN   (   0:imax-1    )
    real(DP), intent(in ) :: y_LatN   (   1:jmax/2    )
    real(DP), intent(out) :: x_ExtLonS(iexmin :iexmax )
    real(DP), intent(out) :: y_ExtLatS(jexmins:jexmaxs)
    real(DP), intent(out) :: x_ExtLonN(iexmin :iexmax )
    real(DP), intent(out) :: y_ExtLatN(jexminn:jexmaxn)


    !
    ! local variables
    !
    integer  :: idest
    integer  :: idep
    integer  :: a_ireq_send(4)
    integer  :: a_ireq_recv(4)
    real(DP), allocatable :: y_LatSPrev(:)
    real(DP), allocatable :: y_LatNPrev(:)
    real(DP), allocatable :: y_LatSNext(:)
    real(DP), allocatable :: y_LatNNext(:)

    real(DP) :: h, theta, thetasq

    integer  :: i, j, k, m

    logical, save :: sw_fs
    data sw_fs /.true./


    if( .not. sw_fs ) return
    sw_fs = .false.


    x_ExtLonS(-2) = 0.0_DP - ( x_LonS(2) - x_LonS(0) )
    x_ExtLonS(-1) = 0.0_DP - ( x_LonS(1) - x_LonS(0) )
    do i = 0, imax-1
      x_ExtLonS(i) = x_LonS(i)
    end do
    x_ExtLonS(imax-1+1) = PIx2
    x_ExtLonS(imax-1+2) = PIx2 + ( x_LonS(1) - x_LonS(0) )
    x_ExtLonS(imax-1+3) = PIx2 + ( x_LonS(2) - x_LonS(0) )
    !
    x_ExtLonN(-2) = 0.0_DP - ( x_LonN(2) - x_LonN(0) )
    x_ExtLonN(-1) = 0.0_DP - ( x_LonN(1) - x_LonN(0) )
    do i = 0, imax-1
      x_ExtLonN(i) = x_LonN(i)
    end do
    x_ExtLonN(imax-1+1) = PIx2
    x_ExtLonN(imax-1+2) = PIx2 + ( x_LonN(1) - x_LonN(0) )
    x_ExtLonN(imax-1+3) = PIx2 + ( x_LonN(2) - x_LonN(0) )


    !====================================================================

    if ( myrank > 0          ) then
      allocate( y_LatSPrev(1:dtjw) )
      allocate( y_LatNPrev(1:dtjw) )
    end if
    if ( myrank < (nprocs-1) ) then
      allocate( y_LatSNext(1:dtjw) )
      allocate( y_LatNNext(1:dtjw) )
    end if


    ! y_Lat(1:dtjw) values are transfered (y_LatSPrev).
    !
    if ( myrank < (nprocs-1) ) then
      idest = myrank + 1
      call MPIWrapperISend( idest, dtjw, y_Lat(1:dtjw), a_ireq_send(1) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, dtjw, y_LatSPrev, a_ireq_recv(1) )
    end if
    !
    ! y_Lat(jmax/2+1-dtjw:jmax/2) values are transfered (y_LatSNext).
    !
    if ( myrank > 0 ) then
      idest = myrank - 1
      call MPIWrapperISend( idest, dtjw, y_Lat(jmax/2+1-dtjw:jmax/2), a_ireq_send(2) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, dtjw, y_LatSNext, a_ireq_recv(2) )
    end if
    !
    ! y_Lat(jmax/2+1:jmax/2+dtjw) values are transfered (y_LatNNext).
    !
    if ( myrank > 0 ) then
      idest = myrank - 1
      call MPIWrapperISend( idest, dtjw, y_Lat(jmax/2+1:jmax/2+dtjw), a_ireq_send(3) )
    end if
    if ( myrank < (nprocs-1) ) then
      idep = myrank + 1
      call MPIWrapperIRecv( idep, dtjw, y_LatNNext, a_ireq_recv(3) )
    end if
    !
    ! y_Lat(jmax+1-dtjw:jmax) values are transfered (y_LatNPrev).
    !
    if ( myrank < (nprocs-1) ) then
      idest = myrank + 1
      call MPIWrapperISend( idest, dtjw, y_Lat(jmax+1-dtjw:jmax), a_ireq_send(4) )
    end if
    if ( myrank > 0 ) then
      idep = myrank - 1
      call MPIWrapperIRecv( idep, dtjw, y_LatNPrev, a_ireq_recv(4) )
    end if

    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(1) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(2) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(2) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_send(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_recv(3) )
    if ( myrank < (nprocs-1) ) call MPIWrapperWait( a_ireq_send(4) )
    if ( myrank > 0          ) call MPIWrapperWait( a_ireq_recv(4) )


    do j = 1, jmax/2
      y_ExtLatS(j) = y_LatS(j)
      y_ExtLatN(j) = y_LatN(j)
    end do


    ! southern edge of southern array
    if( myrank == (nprocs-1) ) then
      y_ExtLatS(0) = -PIH
      do j = 1, dtjw
        y_ExtLatS(0-j) = -PIH - ( y_LatS(j) - ( -PIH ) )
      end do
    else
      do j = 1, dtjw
        y_ExtLatS(1-j) = y_LatSNext(dtjw-(j-1))
      end do
    end if
    ! northern edge of southern array
    if ( myrank == 0 ) then
      do j = 1, dtjw
        y_ExtLatS(jmax/2+j) = y_LatN(j)
      end do
    else
      do j = 1, dtjw
        y_ExtLatS(jmax/2+j) = y_LatSPrev(j)
      end do
    end if
    !
    ! southern edge of northern array
    if ( myrank == 0 ) then
      do j = 1, dtjw
        y_ExtLatN(-j+1) = y_LatS(jmax/2-(j-1))
      end do
    else
      do j = 1, dtjw
        y_ExtLatN(-j+1) = y_LatNPrev(dtjw-(j-1))
      end do
    end if
    ! northern edge of northern array
    if( myrank == (nprocs-1) ) then
      y_ExtLatN(jmax/2+1) = PIH
      do j = 1, dtjw
        y_ExtLatN(jmax/2+1+j) = PIH + ( PIH - y_LatN(jmax/2+1-j) )
      end do
    else
      do j = 1, dtjw
        y_ExtLatN(jmax/2+j) = y_LatNNext(j)
      end do
    end if

    if ( myrank > 0          ) then
      deallocate( y_LatSPrev )
      deallocate( y_LatNPrev )
    end if
    if ( myrank < (nprocs-1) ) then
      deallocate( y_LatSNext )
      deallocate( y_LatNNext )
    end if



!!$    allocate( a_LQIFUVNP(jmax/2-1:jmax/2+2) )
!!$    allocate( a_LQIFUVSP(      -1:2       ) )

    allocate( a_LCIFUVNP(jmax/2-1:jmax/2+3) )
    allocate( a_LCIFUVSP(      -2:2       ) )



    !
    ! calculation of factors for Lagrange cubic interpolation used 
    ! to estimate mixing ratios at poles
    !
    if( myrank == (nprocs-1) ) then

!!$      !
!!$      ! calculation of factors for Lagrange quadratic interpolation used 
!!$      ! to estimate wind velocities at south pole (old)
!!$      !
!!$      a_LQIFUVSP(-1) =                                                              &
!!$        &     ( y_ExtLatS( 0) - y_ExtLatS( 1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 2) )   &
!!$        & / ( ( y_ExtLatS(-1) - y_ExtLatS( 1) ) * ( y_ExtLatS(-1) - y_ExtLatS( 2) ) )
!!$      a_LQIFUVSP( 0) = 1.0d100
!!$      a_LQIFUVSP( 1) =                                                              &
!!$        &     ( y_ExtLatS( 0) - y_ExtLatS(-1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 2) )   &
!!$        & / ( ( y_ExtLatS( 1) - y_ExtLatS(-1) ) * ( y_ExtLatS( 1) - y_ExtLatS( 2) ) )
!!$      a_LQIFUVSP( 2) =                                                              &
!!$        &     ( y_ExtLatS( 0) - y_ExtLatS(-1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 1) )   &
!!$        & / ( ( y_ExtLatS( 2) - y_ExtLatS(-1) ) * ( y_ExtLatS( 2) - y_ExtLatS( 1) ) )
!!$      !
!!$      ! calculation of factors for Lagrange quadratic interpolation used 
!!$      ! to estimate wind velocities at north pole (old)
!!$      !
!!$      a_LQIFUVNP(jmax/2-1) =                                                                              &
!!$        &     ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+2) ) &
!!$        & / ( ( y_ExtLatN(jmax/2-1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2-1) - y_ExtLatN(jmax/2+2) ) )
!!$      a_LQIFUVNP(jmax/2  ) =                                                                              &
!!$        &     ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+2) ) &
!!$        & / ( ( y_ExtLatN(jmax/2  ) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2  ) - y_ExtLatN(jmax/2+2) ) )
!!$      a_LQIFUVNP(jmax/2+1) = 1.0d100
!!$      a_LQIFUVNP(jmax/2+2) =                                                                              &
!!$        &     ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2  ) ) &
!!$        & / ( ( y_ExtLatN(jmax/2+2) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+2) - y_ExtLatN(jmax/2  ) ) )


      !
      ! calculation of factors for Lagrange cubic interpolation used 
      ! to estimate wind velocities at south pole
      !
      a_LCIFUVSP(-2) = ( y_ExtLatS( 0) - y_ExtLatS(-1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 2) ) / ( ( y_ExtLatS(-2) - y_ExtLatS(-1) ) * ( y_ExtLatS(-2) - y_ExtLatS( 1) ) * ( y_ExtLatS(-2) - y_ExtLatS( 2) ) )
      a_LCIFUVSP(-1) = ( y_ExtLatS( 0) - y_ExtLatS(-2) ) * ( y_ExtLatS( 0) - y_ExtLatS( 1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 2) ) / ( ( y_ExtLatS(-1) - y_ExtLatS(-2) ) * ( y_ExtLatS(-1) - y_ExtLatS( 1) ) * ( y_ExtLatS(-1) - y_ExtLatS( 2) ) )
      a_LCIFUVSP( 0) = 1.0d100
      a_LCIFUVSP( 1) = ( y_ExtLatS( 0) - y_ExtLatS(-2) ) * ( y_ExtLatS( 0) - y_ExtLatS(-1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 2) ) / ( ( y_ExtLatS( 1) - y_ExtLatS(-2) ) * ( y_ExtLatS( 1) - y_ExtLatS(-1) ) * ( y_ExtLatS( 1) - y_ExtLatS( 2) ) )
      a_LCIFUVSP( 2) = ( y_ExtLatS( 0) - y_ExtLatS(-2) ) * ( y_ExtLatS( 0) - y_ExtLatS(-1) ) * ( y_ExtLatS( 0) - y_ExtLatS( 1) ) / ( ( y_ExtLatS( 2) - y_ExtLatS(-2) ) * ( y_ExtLatS( 2) - y_ExtLatS(-1) ) * ( y_ExtLatS( 2) - y_ExtLatS( 1) ) )
      !
      ! calculation of factors for Lagrange cubic interpolation used 
      ! to estimate wind velocities at north pole
      !
      a_LCIFUVNP(jmax/2-1) = ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+2) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+3) ) / ( ( y_ExtLatN(jmax/2-1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2-1) - y_ExtLatN(jmax/2+2) ) * ( y_ExtLatN(jmax/2-1) - y_ExtLatN(jmax/2+3) ) )
      a_LCIFUVNP(jmax/2  ) = ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+2) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+3) ) / ( ( y_ExtLatN(jmax/2  ) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2  ) - y_ExtLatN(jmax/2+2) ) * ( y_ExtLatN(jmax/2  ) - y_ExtLatN(jmax/2+3) ) )
      a_LCIFUVNP(jmax/2+1) = 1.0d100
      a_LCIFUVNP(jmax/2+2) = ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+3) ) / ( ( y_ExtLatN(jmax/2+2) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+2) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+2) - y_ExtLatN(jmax/2+3) ) )
      a_LCIFUVNP(jmax/2+3) = ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+1) - y_ExtLatN(jmax/2+2) ) / ( ( y_ExtLatN(jmax/2+3) - y_ExtLatN(jmax/2-1) ) * ( y_ExtLatN(jmax/2+3) - y_ExtLatN(jmax/2  ) ) * ( y_ExtLatN(jmax/2+3) - y_ExtLatN(jmax/2+2) ) )
    end if


    !
    ! variable for estimating polar values
    !
    if( myrank == ( nprocs-1 ) ) then
      SumSinSq = imax / 2
    else
      SumSinSq = 1.0d100
    end if


  end subroutine SLTTExtArrInit

Private Instance methods

SLTTExtArrMkJMAXTable( )

Subroutine :

[Source]

  subroutine SLTTExtArrMkJMAXTable

    ! メッセージ出力
    ! Message output
    !
    use dc_message, only: MessageNotify

    !
    ! MPI
    !
    use mpi_wrapper, only : nprocs, myrank, MPIWrapperISend, MPIWrapperIRecv, MPIWrapperWait

    !
    ! local variables
    !
    integer          , save, allocatable :: a_TblJMAX(:)
    integer          , save, allocatable :: a_NSSepTblRank(:)
    integer          , save, allocatable :: a_NSSepTblNGrid(:)
    character(STRING), save, allocatable :: a_NSSepTblNS(:)

    integer              :: a_SendBuf(1)
    integer, allocatable :: aa_RecvBuf(:,:)
    integer, allocatable :: a_iReqSend(:)
    integer, allocatable :: a_iReqRecv(:)

    integer              :: n
    integer              :: l


    allocate( a_TblJMAX(0:nprocs-1) )

    ! Make a table containing jmax in all processes
    !
    allocate( aa_RecvBuf(1,0:nprocs-1) )
    allocate( a_iReqSend(0:nprocs-1) )
    allocate( a_iReqRecv(0:nprocs-1) )
    !
    a_SendBuf = jmax
    do n = 0, nprocs-1
      if ( n == myrank ) cycle
      call MPIWrapperISend( n, 1, a_SendBuf      , a_iReqSend(n) )
      call MPIWrapperIRecv( n, 1, aa_RecvBuf(:,n), a_iReqRecv(n) )
    end do
    do n = 0, nprocs-1
      if ( n == myrank ) cycle
      call MPIWrapperWait( a_iReqSend(n) )
      call MPIWrapperWait( a_iReqRecv(n) )
    end do
    !
    aa_RecvBuf(:,myrank) = a_SendBuf
    do n = 0, nprocs-1
      a_TblJMAX(n) = aa_RecvBuf(1,n)
    end do
    !
    deallocate( aa_RecvBuf )
    deallocate( a_iReqSend )
    deallocate( a_iReqRecv )


    ! Table is checked
    do n = 0, nprocs-1
      if ( mod( a_TblJMAX(n), 2 ) /= 0 ) then
        call MessageNotify( 'E', module_name, 'Unexpected jmax in process %d, %d.', i = (/ n, a_TblJMAX(n) /) )
      end if
    end do


    allocate( a_NSSepTblRank (1:nprocs*2) )
    allocate( a_NSSepTblNGrid(1:nprocs*2) )
    allocate( a_NSSepTblNS   (1:nprocs*2) )

    ! a_NSSepTblRank : rank included in a North-South separate table
    l = 1
    do n = nprocs-1, 0, -1
      a_NSSepTblRank(l) = n
      l = l + 1
    end do
    do n = 0, nprocs-1
      a_NSSepTblRank(l) = n
      l = l + 1
    end do
    ! a_NSSepTblNGrid : number of grid included in a North-South separate table
    do l = 1, nprocs*2
      a_NSSepTblNGrid(l) = a_TblJMAX(a_NSSepTblRank(l)) / 2
    end do
    ! a_NSSepTblNS : Symbol representing south- or north-array
    !              : included in a North-South separate table
    do l = 1, nprocs*2
      if ( l <= nprocs ) then
        a_NSSepTblNS(l) = 'S'
      else
        a_NSSepTblNS(l) = 'N'
      end if
    end do

!!$    a_NSSepTblNToBeSent
!!$    a_NSSepTblNToBeRecv

    deallocate( a_NSSepTblRank )
    deallocate( a_NSSepTblNGrid )
    deallocate( a_TblJMAX )

  end subroutine SLTTExtArrMkJMAXTable

SumSinSq

*Variable* :
`SumSinSq` :	`real(DP), save`

a_LCIFUVNP

*Variable* :
`a_LCIFUVNP(:)` :	`real(DP), save, allocatable`

a_LCIFUVSP

*Variable* :
`a_LCIFUVSP(:)` :	`real(DP), save, allocatable`

acoslon1

*Variable* :
`acoslon1( : )` :	`real(DP), save, allocatable`

asinlon1

*Variable* :
`asinlon1( : )` :	`real(DP), save, allocatable`

module_name

Constant :

module_name = ‘sltt_extarr‘ :

character(*), parameter

:	モジュールの名称. Module name

sum_sinsq

*Variable* :
`sum_sinsq` :	`real(DP), save`

version

Constant :

version = ’$Name: dcpam5-20131008 $’ // ’$Id: sltt_extarr.f90,v 1.2 2013-01-27 11:26:14 yot Exp $’ :

character(*), parameter

:	モジュールのバージョン Module version