Class read_time_series
In: io/read_time_series.f90

時系列データの読み込み

Reading time series

Note that Japanese and English are described in parallel.

海表面温度, O3 量などの時系列データを NetCDF ファイルから読み込む.

Reading time series data, such as sea surface temperature, O3, and so on, from NetCDF file.

Procedures List

!$ ! GroundFileGet :地表面データファイルの入力

!$ !—

!$ ! GroundFileOpen :地表面データファイルのオープン
!$ ! GroundFileOutput :地表面データファイルへのデータ出力
!$ ! GroundFileClose :地表面データファイルのクローズ

++

———— :————
!$ ! GroundFileGet :Input ground data file

!$ !—

!$ ! GroundFileOpen :Open ground data file
!$ ! GroundFileOutput :Data output to ground data file
!$ ! GroundFileClose :Close ground data file

++

NAMELIST

!$ ! NAMELIST#ground_file_io_nml

Methods

Included Modules

dc_types dc_message gridset gtool_history dc_string dc_calendar timeset netcdf_wrapper dc_iounit namelist_util

Public Instance methods

Subroutine :

[Source]

  subroutine ReadTimeSeriesInit

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid


    ! 宣言文 ; Declaration statements
    !

    logical :: flag_mpi_init

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号.
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT.
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /read_time_series_nml/ &
!!$      & 
          !
          ! デフォルト値については初期化手続 "read_time_series#ReadTimeSeriesInit"
          ! のソースコードを参照のこと.
          !
          ! Refer to source codes in the initialization procedure
          ! "read_time_series#ReadTimeSeriesInit" for the default values.
          !

    if ( read_time_series_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml,                     & ! (in)
!!$        & nml = read_time_series_nml,       & ! (out)
!!$        & iostat = iostat_nml )             ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$    end if



    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
!!$    call MessageNotify( 'M', module_name, 'InFileName = %c', c1 = trim(InFileName) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )


    read_time_series_inited = .true.


  end subroutine ReadTimeSeriesInit
SetValuesFromTimeSeriesWrapper( FileName, VarName, xy_Var, keyword )
Subroutine :
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xy_Var(0:imax-1, 1:jmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
keyword :character(*), intent(in )

Alias for SetValFromTimeSeriesWrapper2D

SetValuesFromTimeSeriesWrapper( FileName, VarName, xyz_Press, xyz_Var, keyword )
Subroutine :
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(in )
: 地表面温度. Surface temperature
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
keyword :character(*), intent(in )

Alias for SetValFromTimeSeriesWrapper3D

Private Instance methods

Subroutine :
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xy_Var(0:imax-1, 1:jmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
keyword :character(*), intent(in )

[Source]

  subroutine SetValFromTimeSeriesWrapper2D( FileName, VarName, xy_Var, keyword )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*), intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , intent(inout):: xy_Var(0:imax-1, 1:jmax)
                              ! 地表面温度. 
                              ! Surface temperature
    character(*), intent(in   ):: keyword


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( keyword == 'SST' ) then
      call SetValuesFromTimeSeries( TSDataInfoSST, FileName, VarName, xy_Var = xy_Var )
    else if ( keyword == 'SIC' ) then
      call SetValuesFromTimeSeries( TSDataInfoSIC, FileName, VarName, xy_Var = xy_Var )
    else
      stop 'Unsupported keyword'
    end if


  end subroutine SetValFromTimeSeriesWrapper2D
Subroutine :
FileName :character(*), intent(in )
: ファイル名. File name
VarName :character(*), intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(in )
: 地表面温度. Surface temperature
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , intent(inout)
: 地表面温度. Surface temperature
keyword :character(*), intent(in )

[Source]

  subroutine SetValFromTimeSeriesWrapper3D( FileName, VarName, xyz_Press, xyz_Var, keyword )


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*), intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*), intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , intent(in   ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
                              ! 地表面温度. 
                              ! Surface temperature
    real(DP)    , intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
                              ! 地表面温度. 
                              ! Surface temperature
    character(*), intent(in   ):: keyword


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( keyword == 'O3' ) then
      call SetValuesFromTimeSeries( TSDataInfoO3, FileName, VarName, xyz_Press = xyz_Press, xyz_Var = xyz_Var )
    else
      stop 'Unsupported keyword'
    end if


  end subroutine SetValFromTimeSeriesWrapper3D
Subroutine :
TSDataInfo :type(time_series_data), intent(inout)
FileName :character(*) , intent(in )
: ファイル名. File name
VarName :character(*) , intent(in )
: 変数名. Variable name
xyz_Press(0:imax-1, 1:jmax, 1:kmax) :real(DP) , optional, intent(in )
: 3 次元配列. 3D array
xy_Var(0:imax-1, 1:jmax) :real(DP) , optional, intent(inout)
: 2 次元配列. 2D array
xyz_Var(0:imax-1, 1:jmax, 1:kmax) :real(DP) , optional, intent(inout)
: 3 次元配列. 3D array

地表面の諸々のデータを設定します. xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます.

Get various data on ground. Arguments excluding "xy_SurfTemp" are configured at first only.

[Source]

  subroutine SetValuesFromTimeSeries( TSDataInfo, FileName, VarName, xyz_Press, xy_Var, xyz_Var )
    !
    ! 地表面の諸々のデータを設定します. 
    ! xy_SurfTemp 以外は一回目に呼ばれた時のみ設定されます. 
    !
    ! Get various data on ground. 
    ! Arguments excluding "xy_SurfTemp" are configured at first only. 
    !

    ! モジュール引用 ; USE statements
    !

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! 日付および時刻の取り扱い
    ! Date and time handler
    !
    use dc_calendar, only: DCCalDateEvalSecOfYear

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! 宣言文 ; Declaration statements
    !
    implicit none

    type(time_series_data), intent(inout):: TSDataInfo
    character(*)          , intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*)          , intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    real(DP)    , optional, intent(in   ):: xyz_Press(0:imax-1, 1:jmax, 1:kmax)
                              ! 3 次元配列. 
                              ! 3D array
    real(DP)    , optional, intent(inout):: xy_Var (0:imax-1, 1:jmax)
                              ! 2 次元配列. 
                              ! 2D array
    real(DP)    , optional, intent(inout):: xyz_Var(0:imax-1, 1:jmax, 1:kmax)
                              ! 3 次元配列. 
                              ! 3D array

    ! 作業変数
    ! Work variables
    !
    real(DP):: SecOfYear
    integer :: tindex

!!$    real(DP):: xyza_VarInterpolated(0:imax-1, 1:jmax, 1:kmax, 2)

    integer :: t


    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( ( .not. present( xy_Var ) ) .and. ( .not. present( xyz_Var ) ) ) then
      call MessageNotify( 'E', module_name, 'xy_Var or xyz_Var have to be given.' )
    end if

    if ( ( present( xyz_Var ) ) .and. ( .not. present( xyz_Press ) ) ) then
      call MessageNotify( 'E', module_name, 'xyz_Press has to be given, when xyz_Var is given.' )
    end if

    ! 実行文 ; Executable statement
    !
    if ( .not. associated( TSDataInfo % a_time ) ) then
      if ( present( xy_Var ) ) then
        call StructureInit( FileName, VarName, 2, TSDataInfo )
      else
        call StructureInit( FileName, VarName, 3, TSDataInfo )
      end if
    end if


    ! Update values of time paying attention to leap year
    !
    call UpdateTime( TSDataInfo )


    if ( TSDataInfo % tmax >= 2 ) then

      SecOfYear = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )

!!$      write( 6, * ) TSDataInfo%a_time(TSDataInfo%a_tindex(1)), &
!!$        & SecOfYear, TSDataInfo%a_time(TSDataInfo%a_tindex(2))

      if ( ( SecOfYear <   TSDataInfo%a_time(TSDataInfo%a_tindex(1)) ) .or. ( SecOfYear >=  TSDataInfo%a_time(TSDataInfo%a_tindex(2)) ) ) then

        TSDataInfo % a_tindex(1) = 0
        TSDataInfo % a_tindex(2) = 1
        do t = 1, TSDataInfo%tmax
          if ( TSDataInfo % a_time(t) <= SecOfYear ) then
            TSDataInfo % a_tindex(1) = t
            TSDataInfo % a_tindex(2) = t+1
          end if
        end do

!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) 'in if', TSDataInfo % a_tindex(1), TSDataInfo % a_tindex(2)
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'
!!$        write( 6, * ) '##############################################'

        tindex = TSDataInfo % a_tindex(1)
        if ( tindex == 0 ) then
          tindex = TSDataInfo % tmax
        else if ( tindex == TSDataInfo % tmax + 1 ) then
          tindex = 1
        else
          tindex = tindex
        end if

        if ( present( xy_Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        end if

        tindex = TSDataInfo % a_tindex(2)
        if ( tindex == 0 ) then
          tindex = TSDataInfo % tmax
        else if ( tindex == TSDataInfo % tmax + 1 ) then
          tindex = 1
        else
          tindex = tindex
        end if

        if ( present( xy_Var ) ) then
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        else
          call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
        end if

      end if

      if ( present( xy_Var ) ) then
        xy_Var = ( TSDataInfo%xyza_SavedData(:,:,1,2) - TSDataInfo%xyza_SavedData(:,:,1,1)  ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) * ( SecOfYear - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) + TSDataInfo%xyza_SavedData(:,:,1,1)
      else

        TSDataInfo%xyz_VarTimeInterpolated = ( TSDataInfo%xyza_SavedData(:,:,:,2) - TSDataInfo%xyza_SavedData(:,:,:,1)  ) / ( TSDataInfo%a_time(TSDataInfo%a_tindex(2)) - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) * ( SecOfYear - TSDataInfo%a_time(TSDataInfo%a_tindex(1))  ) + TSDataInfo%xyza_SavedData(:,:,:,1)

        call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyz_VarTimeInterpolated, xyz_Press, xyz_Var )

      end if

    else

      if ( present( xy_Var ) ) then
        xy_Var = TSDataInfo%xyza_SavedData(:,:,1,1)
      else
        call VerticalInterpolation( TSDataInfo%NVLevels, TSDataInfo%z_VLevels, TSDataInfo%xyza_SavedData(:,:,:,1), xyz_Press, xyz_Var )
      end if

    end if


  end subroutine SetValuesFromTimeSeries
Subroutine :
FileName :character(*) , intent(in )
: ファイル名. File name
VarName :character(*) , intent(in )
: 変数名. Variable name
NDims :integer , intent(in )
: 時間以外の変数の次元. Number of dimensions except for time dimension
TSDataInfo :type(time_series_data), intent(inout)

[Source]

  subroutine StructureInit( FileName, VarName, NDims, TSDataInfo )

    ! モジュール引用 ; USE statements
    !

    ! gtool4 データ入力
    ! Gtool4 data input
    !
    use gtool_history, only: HistoryGet, HistoryGetPointer

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: toChar

    ! 日付および時刻の取り扱い
    ! Date and time handler
    !
    use dc_calendar, only: DCCalInquire, DCCalDateEvalSecOfYear

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! NetCDF wrapper
    !
    use netcdf_wrapper, only: NWGetAtt, NWInqDimLen


    ! 宣言文 ; Declaration statements
    !
    implicit none

    character(*)          , intent(in   ):: FileName
                              ! ファイル名. 
                              ! File name
    character(*)          , intent(in   ):: VarName
                              ! 変数名. 
                              ! Variable name
    integer               , intent(in   ):: NDims
                              ! 時間以外の変数の次元. 
                              ! Number of dimensions except for time dimension
    type(time_series_data), intent(inout):: TSDataInfo


    ! 作業変数
    ! Work variables
    !
    real(DP)         :: SecOfYear
!!$    real(DP), pointer:: a_time(:)
    integer          :: tindex
    integer          :: t

    character(STRING):: VLevelName

    character(STRING):: attchar

    integer:: hour_in_day, min_in_hour, day_in_year
    integer, pointer:: day_in_month_ptr(:) => null()
    real(DP):: sec_in_min, sec_in_day

    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


!!$    nullify( a_time )


    call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day      = hour_in_day  , min_in_hour      = min_in_hour  , sec_in_min       = sec_in_min )         ! (out)
    day_in_year = sum( day_in_month_ptr )
    deallocate( day_in_month_ptr )
    sec_in_day  = hour_in_day * min_in_hour * sec_in_min


    TSDataInfo % FileName = FileName
    TSDataInfo % VarName  = VarName
    TSDataInfo % NDims    = NDims


    if ( TSDataInfo % NDims == 2 ) then
      TSDataInfo % NVLevels = 1
    else
      VLevelName = "plev"

      call HistoryGetPointer( TSDataInfo%FileName, VLevelName, TSDataInfo % z_VLevels, flag_mpi_split = flag_mpi_split )
      TSDataInfo % NVLevels = size( TSDataInfo % z_Vlevels )

    end if


    !-----
!!$    call HistoryGetPointer(               &
!!$      & TSDataInfo%FileName,              &
!!$      & 'time',                           &
!!$      & a_time,                           &
!!$      & flag_mpi_split = flag_mpi_split   &
!!$      & )
!!$    TSDataInfo % tmax = size( a_time )
!!$
!!$    call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
!!$    if ( ( attchar(1:3) == 'day' ) .or. &
!!$      &  ( attchar(1:3) == 'DAY' ) .or. &
!!$      &  ( attchar(1:3) == 'Day' ) ) then
!!$      a_time = a_time * DAY_SECONDS
!!$    else
!!$      call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
!!$    end if
    !-----


    call NWInqDimLen( TSDataInfo%FileName, 'time', TSDataInfo%tmax )


    if ( TSDataInfo % tmax >= 2 ) then

      SecOfYear = DCCalDateEvalSecOfYear( TimeN, date = InitialDate )

      !-----
!!$      allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
!!$      TSDataInfo % a_time(0) = - ( YEAR_DAYS * DAY_SECONDS - a_time(TSDataInfo%tmax) )
!!$      do t = 1, TSDataInfo%tmax
!!$        TSDataInfo % a_time(t) = a_time(t)
!!$      end do
!!$      TSDataInfo % a_time(TSDataInfo%tmax+1) = YEAR_DAYS * DAY_SECONDS + a_time(1)
!!$      deallocate( a_time )
      !-----


      allocate( TSDataInfo % a_time(0:TSDataInfo%tmax+1) )
      call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
      call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )

      if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then

        TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
      else
        call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
      end if

      TSDataInfo % a_time(0                ) = - ( day_in_year * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
      TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year * sec_in_day + TSDataInfo % a_time(1              )


      allocate( TSDataInfo % a_tindex(1:2) )
      allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:2) )

      TSDataInfo % a_tindex(1) = 0
      TSDataInfo % a_tindex(2) = 1
      do t = 1, TSDataInfo%tmax
        if ( TSDataInfo % a_time(t) <= SecOfYear ) then
          TSDataInfo % a_tindex(1) = t
          TSDataInfo % a_tindex(2) = t+1
        end if
      end do

      tindex = TSDataInfo % a_tindex(1)
      if ( tindex == 0 ) then
        tindex = TSDataInfo % tmax
      else if ( tindex == TSDataInfo % tmax + 1 ) then
        tindex = 1
      else
        tindex = tindex
      end if

      if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      end if

      tindex = TSDataInfo % a_tindex(2)
      if ( tindex == 0 ) then
        tindex = TSDataInfo % tmax
      else if ( tindex == TSDataInfo % tmax + 1 ) then
        tindex = 1
      else
        tindex = tindex
      end if

      if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,2), range = 'time=^'//toChar(tindex), flag_mpi_split = flag_mpi_split )
      end if

      allocate( TSDataInfo%xyz_VarTimeInterpolated(0:imax-1, 1:jmax, 1:TSDataInfo%NVLevels) )

    else

      !-----
!!$      allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
!!$      do t = 1, TSDataInfo%tmax
!!$        TSDataInfo % a_time(t) = a_time(t)
!!$      end do
      !-----


      allocate( TSDataInfo % a_time(TSDataInfo%tmax) )
      call HistoryGet( TSDataInfo%FileName, 'time', TSDataInfo%a_time(1:TSDataInfo%tmax), flag_mpi_split = flag_mpi_split )
      call NWGetAtt( TSDataInfo%FileName, 'time', 'units', attchar )
      if ( ( attchar(1:3) == 'day' ) .or. ( attchar(1:3) == 'DAY' ) .or. ( attchar(1:3) == 'Day' ) ) then
        TSDataInfo%a_time(1:TSDataInfo%tmax) = TSDataInfo%a_time(1:TSDataInfo%tmax) * sec_in_day
      else
        call MessageNotify( 'E', module_name, 'Unit of time, %c, is not supported.', c1 = trim(attchar) )
      end if

      allocate( TSDataInfo % a_tindex(1:1) )
      allocate( TSDataInfo % xyza_SavedData(0:imax-1,1:jmax,1:TSDataInfo%NVLevels,1:1) )

      TSDataInfo % a_tindex(1) = 1

      if ( TSDataInfo % NDims == 2 ) then
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,1,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
      else
        call HistoryGet( TSDataInfo%FileName, TSDataInfo%VarName, TSDataInfo%xyza_SavedData(:,:,:,1), range = 'time=^'//toChar(TSDataInfo%a_tindex(1)), flag_mpi_split = flag_mpi_split )
      end if

    end if


  end subroutine StructureInit
TSDataInfoO3
Variable :
TSDataInfoO3 :type(time_series_data), save
TSDataInfoSIC
Variable :
TSDataInfoSIC :type(time_series_data), save
TSDataInfoSST
Variable :
TSDataInfoSST :type(time_series_data), save
Subroutine :
TSDataInfo :type(time_series_data), intent(inout)

[Source]

  subroutine UpdateTime( TSDataInfo )

    ! モジュール引用 ; USE statements
    !

    ! 暦と日時の取り扱い
    ! Calendar and Date handler
    !
    use dc_calendar, only: DC_CAL_DATE             ! 日時を表現するデータ型.
                                ! Data type for date and time

    ! 日付および時刻の取り扱い
    ! Date and time handler
    !
    use dc_calendar, only: DCCalInquire, DCCalDateCreate, DCCalDateInquire, DCCalDateDifference, DCCalDateChkLeapYear

    ! 時刻管理
    ! Time control
    !
    use timeset, only: TimeN, InitialDate

    ! 宣言文 ; Declaration statements
    !
    implicit none

    type(time_series_data), intent(inout):: TSDataInfo


    ! 作業変数
    ! Work variables
    !
    integer           :: hour_in_day, min_in_hour, day_in_year
    integer, pointer  :: day_in_month_ptr(:) => null()
    real(DP)          :: sec_in_min, sec_in_day

    integer           :: year
    type(DC_CAL_DATE) :: PreYearDate


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


    if ( TSDataInfo % tmax >= 2 ) then

      call DCCalInquire( day_in_month_ptr = day_in_month_ptr , hour_in_day      = hour_in_day  , min_in_hour      = min_in_hour  , sec_in_min       = sec_in_min )         ! (out)
      day_in_year = sum( day_in_month_ptr )
      deallocate( day_in_month_ptr )
      sec_in_day  = hour_in_day * min_in_hour * sec_in_min


      ! Set TSDataInfo % a_time(0)
      !

      call DCCalDateInquire( year       = year, elapse_sec = TimeN, date       = InitialDate )
      call DCCalDateCreate( year       = year - 1, month      = 1, day        = 1, hour       = 0, min        = 0, sec        = 0.0_DP, date       = PreYearDate )

      if ( DCCalDateChkLeapYear( 0.0_DP, PreYearDate ) ) then
        TSDataInfo % a_time(0                ) = - ( ( day_in_year + 1 ) * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
      else
        TSDataInfo % a_time(0                ) = - (   day_in_year       * sec_in_day - TSDataInfo % a_time(TSDataInfo%tmax) )
      end if


      ! Set TSDataInfo % a_time(TSDataInfo%tmax+1)
      !

      if ( DCCalDateChkLeapYear( TimeN, InitialDate ) ) then
        TSDataInfo % a_time(TSDataInfo%tmax+1) = ( day_in_year + 1 ) * sec_in_day + TSDataInfo % a_time(1              )
      else
        TSDataInfo % a_time(TSDataInfo%tmax+1) = day_in_year       * sec_in_day + TSDataInfo % a_time(1              )
      end if


    end if


  end subroutine UpdateTime
Subroutine :
NVLevels :integer , intent(in )
z_VLevelsIn(1:NVLevels) :real(DP), intent(in )
xyz_VarIn(0:imax-1, 1:jmax, 1:NVLevels) :real(DP), intent(in )
xyz_VarOut(0:imax-1, 1:jmax, 1:kmax) :real(DP), intent(out)

[Source]

  subroutine VerticalInterpolation( NVLevels, z_VLevelsIn, xyz_VarIn, xyz_VLevelsOut, xyz_VarOut )

    ! モジュール引用 ; USE statements
    !

    ! 宣言文 ; Declaration statements
    !
    implicit none

    integer , intent(in ):: NVLevels
    real(DP), intent(in ):: z_VLevelsIn(1:NVLevels)
    real(DP), intent(in ):: xyz_VarIn  (0:imax-1, 1:jmax, 1:NVLevels)
    real(DP), intent(in ):: xyz_VlevelsOut(0:imax-1, 1:jmax, 1:kmax)
    real(DP), intent(out):: xyz_VarOut    (0:imax-1, 1:jmax, 1:kmax)


    ! 作業変数
    ! Work variables
    !
    integer:: i
    integer:: j
    integer:: k
    integer:: kk
    integer:: xyz_kk(0:imax-1, 1:jmax, 1:kmax)


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. read_time_series_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if

    ! Check order of vertical levels
    !
    if ( z_VlevelsIn(1) < z_VlevelsIn(2) ) then
      call MessageNotify( 'E', module_name, 'The order of vertical levels is inappropriate.' )
    end if


    xyz_kk = 1

    do kk = 1, NVLevels-1

      do k = 1, kmax
        do j = 1, jmax
          do i = 0, imax-1
            if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(kk) ) then
              xyz_kk(i,j,k) = kk
            end if
          end do
        end do
      end do

    end do


    do k = 1, kmax
      do j = 1, jmax
        do i = 0, imax-1

!!$          if ( xyz_VLevelsOut(i,j,k) > z_VLevelsIn(1) ) then
!!$            xyz_VarOut(i,j,k) = xyz_VarIn(i,j,1)
!!$
!!$!          else if ( xyz_VLevelsOut(i,j,k) < z_VLevelsIn(NVLevels) ) then
!!$!            call MessageNotify( 'E', module_name, 'Vertical level is out of given range.' )
!!$!!            xyz_VarOut(i,j,k) = 0.0d0
!!$
!!$          else
!!$
!!$            xyz_VarOut(i,j,k) = &
!!$              &   ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1)     - xyz_VarIn(i,j,xyz_kk(i,j,k)) ) &
!!$              & / log( z_VLevelsIn   (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k))   ) &
!!$              & * log( xyz_VLevelsOut(i,j,k)           / z_VLevelsIn(xyz_kk(i,j,k))   ) &
!!$              & + xyz_VarIn(i,j,xyz_kk(i,j,k))
!!$
!!$          end if


          xyz_VarOut(i,j,k) = log(   ( xyz_VarIn(i,j,xyz_kk(i,j,k)+1) + 1.0d-100 ) / ( xyz_VarIn(i,j,xyz_kk(i,j,k)  ) + 1.0d-100 )                ) / log( z_VLevelsIn   (xyz_kk(i,j,k)+1) / z_VLevelsIn(xyz_kk(i,j,k))   ) * log( xyz_VLevelsOut(i,j,k)           / z_VLevelsIn(xyz_kk(i,j,k))   ) + log( xyz_VarIn(i,j,xyz_kk(i,j,k)) + 1.0d-100 )
          xyz_VarOut(i,j,k) = exp( xyz_VarOut(i,j,k) )


        end do
      end do
    end do


    do k = 1, kmax
      do j = 1, jmax
        do i = 0, imax-1

          if ( xyz_VarOut(i,j,k) < 0.0d0 ) then
            xyz_VarOut(i,j,k) = 0.0d0
          end if

        end do
      end do
    end do


!!$    i = 0
!!$    j = jmax / 2
!!$    do k = 1, NVLevels
!!$      write( 92, * ) z_VLevelsIn(k), xyz_VarIn(i,j,k)
!!$    end do
!!$    write( 92, * )
!!$    call flush( 92 )
!!$    do k = 1, kmax
!!$      write( 93, * ) xyz_VLevelsOut(i,j,k), xyz_VarOut(i,j,k)
!!$    end do
!!$    write( 93, * )
!!$    call flush( 93 )
!!$    stop


  end subroutine VerticalInterpolation
flag_mpi_split
Variable :
flag_mpi_split = .true. :logical, save
module_name
Constant :
module_name = ‘read_time_series_from_file‘ :character(*), parameter
: モジュールの名称. Module name
read_time_series_inited
Variable :
read_time_series_inited = .false. :logical, save
: 初期設定フラグ. Initialization flag
time_series_data
Derived Type :
FileName :character(STRING)
: ファイル名. File name
VarName :character(STRING)
: 変数名. Variable name
NDims :integer
tmax :integer
NVLevels :integer
z_VLevels(:) :real(DP), pointer
a_time(:) :real(DP), pointer
a_tindex(:) :integer , pointer
xyza_SavedData(:,:,:,:) :real(DP), pointer
xyz_VarTimeInterpolated(:,:,:) :real(DP), pointer
version
Constant :
version = ’$Name: dcpam5-20120413 $’ // ’$Id: read_time_series.f90,v 1.13 2011-06-19 11:12:40 yot Exp $’ :character(*), parameter
: モジュールのバージョン Module version