| Class | surface_data |
| In: |
prepare_data/surface_data.f90
|
Note that Japanese and English are described in parallel.
GCM で用いる地表面データを生成します. 現在は暫定的に Hosaka et al. (1998) の SST 分布を与えます.
Surface data for GCM is generated. Now, SST profile in Hosaka et al. (1998) is provided tentatively.
| SurfDataGet : | 地表面データの取得 |
| ———— : | ———— |
| SurfDataGet : | Get surface data |
| Subroutine : | |||
| xy_SurfTemp(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfAlbedo(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfHumidCoeff(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfRoughLength(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfHeatCapacity(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_GroundTempFlux(0:imax-1, 1:jmax) : | real(DP), intent(out), optional
| ||
| xy_SurfCond(0:imax-1, 1:jmax) : | integer, intent(out), optional
|
GCM 用の地表面データを返します.
Return surface data for GCM.
subroutine SurfDataGet( xy_SurfTemp, xy_SurfAlbedo, xy_SurfHumidCoeff, xy_SurfRoughLength, xy_SurfHeatCapacity, xy_GroundTempFlux, xy_SurfCond )
!
! GCM 用の地表面データを返します.
!
! Return surface data for GCM.
!
! モジュール引用 ; USE statements
!
! 座標データ設定
! Axes data settings
!
use axesset, only: y_Lat ! $ \varphi $ [rad.] . 緯度. Latitude
! 物理定数設定
! Physical constants settings
!
use constants, only: PI ! $ \pi $ .
! 円周率. Circular constant
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(out), optional:: xy_SurfTemp (0:imax-1, 1:jmax)
! 地表面温度.
! Surface temperature
real(DP), intent(out), optional:: xy_SurfAlbedo (0:imax-1, 1:jmax)
! 地表アルベド.
! Surface albedo
real(DP), intent(out), optional:: xy_SurfHumidCoeff (0:imax-1, 1:jmax)
! 地表湿潤度.
! Surface humidity coefficient
real(DP), intent(out), optional:: xy_SurfRoughLength (0:imax-1, 1:jmax)
! 地表粗度長.
! Surface rough length
real(DP), intent(out), optional:: xy_SurfHeatCapacity (0:imax-1, 1:jmax)
! 地表熱容量.
! Surface heat capacity
real(DP), intent(out), optional:: xy_GroundTempFlux (0:imax-1, 1:jmax)
! 地中熱フラックス.
! Ground temperature flux
integer, intent(out), optional:: xy_SurfCond (0:imax-1, 1:jmax)
! 地表状態 (0: 固定, 1: 可変) .
! Surface condition (0: fixed, 1: variable)
! 作業変数 (Hosaka et al. (1998))
! Work variables (Hosaka et al. (1998))
!
real(DP):: TempEq ! 赤道上 (正確には LatCenter 上) での温度.
! Temperature on the equator
! (on LatCenter, to be exact)
real(DP):: LatCenter ! 温度最高の緯度.
! Latitude on which temperature is maximum.
real(DP):: LatFlatWidth ! 温度が平坦化される緯度幅.
! Latitude width in which temperature is flattened
integer:: jp
integer:: jm
real(DP):: LatA, Alpha, Beta, Gamma
real(DP):: Phi1, AlphaBeta4, Phi, LatAPlus, LatAMinus
real(DP):: SurfTempMx
! 作業変数
! Work variables
!
!!$ integer:: i ! 経度方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in longitude
integer:: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
!!$ integer:: k ! 鉛直方向に回る DO ループ用作業変数
!!$ ! Work variables for DO loop in vertical direction
! 実行文 ; Executable statement
if ( .not. surface_data_inited ) call SurfDataInit
select case ( LChar( trim(Pattern) ) )
! SST 一様
! SST is homogeneous
!
case ( 'homogeneous' )
if ( present(xy_SurfTemp ) ) xy_SurfTemp = SurfTemp
if ( present(xy_SurfAlbedo ) ) xy_SurfAlbedo = Albedo
if ( present(xy_SurfHumidCoeff ) ) xy_SurfHumidCoeff = HumidCoeff
if ( present(xy_SurfRoughLength ) ) xy_SurfRoughLength = RoughLength
if ( present(xy_SurfHeatCapacity) ) xy_SurfHeatCapacity = HeatCapacity
if ( present(xy_GroundTempFlux ) ) xy_GroundTempFlux = TempFlux
if ( present(xy_SurfCond ) ) xy_SurfCond = SurfCond
! Hosaka et al. (1998) において用いられた SST
! SST used in Hosaka et al. (1998)
!
case ( 'hosaka et al. (1998)' )
if ( present(xy_SurfAlbedo ) ) xy_SurfAlbedo = Albedo
if ( present(xy_SurfHumidCoeff ) ) xy_SurfHumidCoeff = HumidCoeff
if ( present(xy_SurfRoughLength ) ) xy_SurfRoughLength = RoughLength
if ( present(xy_SurfHeatCapacity) ) xy_SurfHeatCapacity = HeatCapacity
if ( present(xy_GroundTempFlux ) ) xy_GroundTempFlux = TempFlux
if ( present(xy_SurfCond ) ) xy_SurfCond = SurfCond
if ( present( xy_SurfTemp ) ) then
TempEq = SurfTemp
LatCenter = 0.0_DP
LatFlatWidth = 7.0_DP
LatA = 30.0_DP
Alpha = 60.0_DP
Beta = 32.0_DP
Gamma = 0.0_DP
Phi1 = abs( LatA * PI / 180.0_DP )
AlphaBeta4 = 2.0_DP *( Phi1**3 ) * ( Beta / Alpha )
do j = 1, jmax
Phi = abs( y_Lat(j) - LatCenter * PI / 180.0_DP )
xy_SurfTemp (:,j) = TempEq - Alpha / 2.0_DP * ( Phi - max( sqrt( Phi1**2 + AlphaBeta4 ) - sqrt( ( Phi - Phi1 )**2 + AlphaBeta4 ), 0.0_DP ) ) + Gamma * ( Phi**3 )
end do
! 中心 LatCenter +/- LatFlatWidth の間を平坦に
! Flatten between LatCenter +/- LatFlatWidth
!
if ( LatFlatWidth < 0.0_DP ) then
LatFlatWidth = - LatFlatWidth
end if
LatAPlus = ( LatCenter + LatFlatWidth ) * PI / 180.0_DP
LatAMinus = ( LatCenter - LatFlatWidth ) * PI / 180.0_DP
jp = 1
jm = jmax
do j = 1, jmax
if ( y_Lat(j) <= LatAPlus ) then
jp = j
if ( j == jmax ) jp = jp - 1
end if
if ( y_Lat(j) < LatAMinus ) then
jm = j
if ( j == jmax ) jm = jm - 1
end if
end do
SurfTempMx = ( xy_SurfTemp(1,jm) * ( y_Lat(jm+1) - LatAMinus ) + xy_SurfTemp(1,jm+1) * ( LatAMinus - y_Lat(jm) ) ) / ( y_Lat(jm+1) - y_Lat(jm) )
xy_SurfTemp(:,jm+1:jp) = SurfTempMx
end if
end select
end subroutine SurfDataGet
| Variable : | |||
| surface_data_inited = .false. : | logical, save, public
|
| Subroutine : |
依存モジュールの初期化チェック
Check initialization of dependency modules
subroutine InitCheck
!
! 依存モジュールの初期化チェック
!
! Check initialization of dependency modules
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_util_inited
! 格子点設定
! Grid points settings
!
use gridset, only: gridset_inited
! 物理定数設定
! Physical constants settings
!
use constants, only: constants_inited
! 座標データ設定
! Axes data settings
!
use axesset, only: axesset_inited
! 実行文 ; Executable statement
if ( .not. namelist_util_inited ) call MessageNotify( 'E', module_name, '"namelist_util" module is not initialized.' )
if ( .not. gridset_inited ) call MessageNotify( 'E', module_name, '"gridset" module is not initialized.' )
if ( .not. constants_inited ) call MessageNotify( 'E', module_name, '"constants" module is not initialized.' )
if ( .not. axesset_inited ) call MessageNotify( 'E', module_name, '"axesset" module is not initialized.' )
end subroutine InitCheck
| Variable : | |||
| Pattern : | character(STRING), save
|
| Variable : | |||
| SurfCond : | integer, save
|
| Subroutine : |
This procedure input/output NAMELIST#surface_data_nml .
subroutine SurfDataInit
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! 文字列操作
! Character handling
!
use dc_string, only: LChar
! 宣言文 ; Declaration statements
!
implicit none
integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
! Unit number for NAMELIST file open
integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
namelist /surface_data_nml/ Pattern, SurfTemp, Albedo, HumidCoeff, RoughLength, HeatCapacity, TempFlux, SurfCond
!
! デフォルト値については初期化手続 "surface_data#SurfDataInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "surface_data#SurfDataInit" for the default values.
!
! 実行文 ; Executable statement
if ( surface_data_inited ) return
call InitCheck
! デフォルト値の設定 (まずは Pattern のみ)
! Default values settings (At first, "Pattern" only)
!
Pattern = 'Hosaka et al. (1998)'
! NAMELIST の読み込み (まずは Pattern のみ)
! NAMELIST is input (At first, "Pattern" only)
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = surface_data_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
end if
! デフォルト値の設定
! Default values settings
!
select case ( LChar( trim(Pattern) ) )
case ( 'hosaka et al. (1998)' )
SurfTemp = 302.0_DP
Albedo = 0.15_DP
HumidCoeff = 1.0_DP
RoughLength = 1.0e-4_DP
HeatCapacity = 0.0_DP
TempFlux = 0.0_DP
SurfCond = 0
case ( 'homogeneous' )
SurfTemp = 273.0_DP
Albedo = 0.15_DP
HumidCoeff = 1.0_DP
RoughLength = 1.0e-4_DP
HeatCapacity = 0.0_DP
TempFlux = 0.0_DP
SurfCond = 0
case default
call MessageNotify( 'E', module_name, 'Pattern=<%c> is invalid.', c1 = trim(Pattern) )
end select
! NAMELIST の読み込み
! NAMELIST is input
!
if ( trim(namelist_filename) /= '' ) then
call FileOpen( unit_nml, namelist_filename, mode = 'r' ) ! (in)
rewind( unit_nml )
read( unit_nml, nml = surface_data_nml, iostat = iostat_nml ) ! (out)
close( unit_nml )
call NmlutilMsg( iostat_nml, module_name ) ! (in)
end if
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, ' Pattern = %c', c1 = trim(Pattern) )
call MessageNotify( 'M', module_name, ' SurfTemp = %f', d = (/ SurfTemp /) )
call MessageNotify( 'M', module_name, ' Albedo = %f', d = (/ Albedo /) )
call MessageNotify( 'M', module_name, ' HumidCoeff = %f', d = (/ HumidCoeff /) )
call MessageNotify( 'M', module_name, ' RoughLength = %f', d = (/ RoughLength /) )
call MessageNotify( 'M', module_name, ' HeatCapacity = %f', d = (/ HeatCapacity /) )
call MessageNotify( 'M', module_name, ' TempFlux = %f', d = (/ TempFlux /) )
call MessageNotify( 'M', module_name, ' SurfCond = %d', i = (/ SurfCond /) )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
surface_data_inited = .true.
end subroutine SurfDataInit
| Constant : | |||
| module_name = ‘surface_data‘ : | character(*), parameter
|
| Constant : | |||
| version = ’$Name: dcpam5-20090306 $’ // ’$Id: surface_data.f90,v 1.2 2008-11-07 13:39:11 morikawa Exp $’ : | character(*), parameter
|