#= dcpam_ape プログラム用 NAMELIST ファイル (T21L16 用)
#
#= NAMELIST file for "dcpam_ape"
#
# Copyright (C) GFD Dennou Club, 2008-2009. All rights reserved.
#
# Note that Japanese and English are described in parallel.
#

&dcpam_main_nml
    DynMode                 = 'HSPLVAS83',
!!$    DynMode                 = 'NoHorAdv',
    PhysMode                = 'FullPhysics',
!!$    PhysMode                = 'HS94',
!!$    PhysMode                = 'VenusSimple',
!!$    PhysMode                = 'JupiterSimple',
!!$    PhysMode                = 'NoPhysics',
    RadModel                = 'DennouAGCM',
!!$    RadModel                = 'Earth',
!!$    RadModel                = 'Mars',
!!$    RadModel                = 'SL09',
    PhysImpMode             = '1LayModel',
!!$    PhysImpMode             = 'SoilModel',
!!$    PhysImpMode             = 'SoilModelSO',
!!$    PhysImpMode             = 'AtmOnly',
!!$    MCMethod                = 'None',
    MCMethod                = 'MCA',
!!$    MCMethod                = 'RAS',
!!$    LSCMethod               = 'None',
    LSCMethod               = 'M65',
!!$    LSCMethod               = 'LL91',
    CloudMethod             = 'None',
!!$    CloudMethod             = 'Simple',
    SfcMoistMethod          = 'None'
!!$    SfcMoistMethod          = 'Bucket'
!!$    DCMethod                = 'None',
    DCMethod                = 'DCA',
/
&fileset_nml
  FileTitle = 'Aqua planet experiments', 
                              ! 出力データファイルの表題.
                              ! Title of output data files
  FileSource = 'dcpam5 $Name:  $ (http://www.gfd-dennou.org/library/dcpam)', 
                              ! データファイル作成の手段. 
                              ! Source of data file
  FileInstitution = 'GFD Dennou Club (http://www.gfd-dennou.org)'
                              ! データファイルを最終的に変更した組織/個人. 
                              ! Institution or person that changes data files for the last time
/
&gridset_nml
  nmax = 21,                  ! 最大全波数. 
                              ! Maximum truncated wavenumber
  imax = 64,                  ! 経度格子点数. 
                              ! Number of grid points in longitude
  jmax = 32,                  ! 緯度格子点数. 
                              ! Number of grid points in latitude
  kmax = 16                   ! 鉛直層数. 
                              ! Number of vertical level
/
&timeset_nml
  RestartTimeValue  = 0.0, 
                              ! リスタート開始時刻. 
                              ! Restart time of calculation
  RestartTimeUnit   = 'day', 
                              ! リスタート開始時刻の単位. 
                              ! Unit of restart time of calculation
  IntegPeriodValue    = 10.0, 
                              ! 積分時間. 
                              ! Integral time. 
  IntegPeriodUnit     = 'day', 
                              ! 計算開始時刻の単位. 
                              ! Unit of end time of calculation
  DelTimeValue    = 40.0, 
                              ! $ \Delta t $ .  単位は DelTimeUnit にて指定.
                              ! Unit is specified by "DelTimeUnit". 
  DelTimeUnit     = 'min', 
                              ! $ \Delta t $ の単位. 
                              ! Unit of $ \Delta t $ 
  ! 計算開始日時
  ! Start date of calculation
  ! 
  InitialYear  = 2000, InitialMonth = 1, InitialDay   = 1
  InitialHour  = 0,    InitialMin   = 0, InitialSec   = 0.0

  ! 計算終了日時  ("IntegPeriodValue" が負の場合にこちらが使用される)
  ! End date of calculation (These are used when "IntegPeriodValue" is negative)
  ! 
  EndYear  = 2000, EndMonth = 2, EndDay   = 1
  EndHour  = 0,    EndMin   = 0, EndSec   = 0.0

  PredictIntValue = 1.0, 
                              ! 終了予測日時表示間隔. 
                              ! Interval of predicted end time output
  PredictIntUnit  = 'day', 
                              ! 終了予測日時表示間隔 (単位). 
                              ! Unit for interval of predicted end time output
  CpuTimeMoniter  = .true.
                              ! CPU 時間計測のオンオフ
                              ! On/off of CPU time monitoring
/
&restart_file_io_nml
  InputFile = 'init_T21L16.nc', 
                              ! 入力する初期値/リスタートデータのファイル名
                              ! filename of input initial/restart data
  OutputFile = 'rst.nc', 
                              ! 出力するリスタートデータのファイル名
                              ! filename of output restart data
  IntValue = 10.0, 
                              ! リスタートデータの出力間隔. 
                              ! Interval of restart data output
  IntUnit = 'day' 
                              ! リスタートデータの出力間隔の単位. 
                              ! Unit for interval of restart data output
/
&surface_properties_nml
  SurfTempSetting    = 'file', 
                              ! 地表面温度の設定方法
                              ! Setting of surface temperature
  SurfTempFile     = 'sst_T21.nc',
                              ! 地表面温度のファイル名. 
                              ! File name of surface temperature
  SurfTempName     = 'SurfTemp',
                              ! 地表面温度の変数名. 
                              ! Variable name of surface temperature
/
&moist_conv_adjust_nml
  CrtlRH          = 0.99d0, 
  ItrtMax         = 10, 
  AdjustCriterion = 0.01d0, 0.02d0, 0.02d0, 0.05d0, 0.05d0, 0.10d0, 0.10d0, 0.20d0, 0.20d0, 0.40d0
/
&dry_conv_adjust_nml
  ItrtMax         = 10, 
  AdjustCriterion = 0.01d0, 0.02d0, 0.02d0, 0.05d0, 0.05d0, 0.10d0, 0.10d0, 0.20d0, 0.20d0, 0.40d0
/
&rad_DennouAGCM_nml
  RstInputFile = '',
                              ! 入力するリスタートデータのファイル名
                              ! Filename of input restart data
  RstOutputFile = 'rst_rad.nc',
                              ! 出力するリスタートデータのファイル名
                              ! Filename of output restart data
/
&axesset_nml
  Sigma = 1.000, 0.990, 0.970, 0.930, 0.870, 0.790, 0.700, 0.600, 0.500, 0.410, 0.330, 0.260, 0.200, 0.150, 0.100, 0.050, 0.000
                              ! $ \sigma $ レベル (半整数). 
                              ! Half $ \sigma $ level
/
&dynamics_hspl_vas83_nml
  HDOrder = 8,
                              ! 超粘性の次数.  Order of hyper-viscosity
  HDEFoldTimeValue = 3.0, 
                              ! 最大波数に対する e-folding time. 
                              ! 負の値を与えると, 水平拡散係数をゼロにします. 
                              ! 
                              ! E-folding time for maximum wavenumber. 
                              ! If negative value is given, 
                              ! coefficients of horizontal diffusion become zero.
  HDEFoldTimeUnit = 'hrs'
                              ! 最大波数に対する e-folding time の単位. 
                              ! Unit of e-folding time for maximum wavenumber
/
!
! ヒストリデータ出力の全体設定
! Global settings about history data output
!
&gtool_historyauto_nml
  IntValue = 0.25,
                              ! ヒストリデータの出力間隔の数値. 
                              ! 負の値を与えると, 出力を抑止します. 
                              !
                              ! Numerical value for interval of history data output
                              ! Negative values suppress output.
  IntUnit = 'day',
!!$  IntUnit = 'hrs',
!!$  IntUnit = 'min',
!!$  IntUnit = 'sec',
                              ! ヒストリデータの出力間隔の単位. 
                              ! Unit for interval of history data output
  Precision = 'float',
!!$  Precision = 'double',
                              ! ヒストリデータの精度. 
                              ! Precision of history data
  FilePrefix = '',
!!$  FilePrefix = 'data01/',
                              ! ヒストリデータのファイル名の接頭詞. 
                              ! Prefixes of history data filenames
/
!
! ヒストリデータ出力の個別設定
! Individual settings about history data output
!
&gtool_historyauto_nml
  Name = 'U, V, Temp, Ps, QVap',
/
&gtool_historyauto_nml
  Name = 'Vor, Div, SigDot, DPiDt'
/
&gtool_historyauto_nml
  Name = 'SurfTemp'
/
&gtool_historyauto_nml
  Name = 'Rain',
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'Evap, Sens, OLR, SLR, OSR, SSR'
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'EvapA, SensA, OLRA, SLRA, OSRA, SSRA'
  TimeAverage = .true.
/
&gtool_historyauto_nml
  Name = 'Mass, KinEngy, IntEngy, PotEngy, LatEngy, TotEngy, Enstro'
  SpaceAverage = .true., .true., .true.,
  Precision = 'double',
/
!!$&gtool_historyauto_nml
!!$  Name = 'RainCumulus, RainLsc',
!!$  TimeAverage = .true.
!!$/
!!$&gtool_historyauto_nml
!!$  Name = 'DTempDtCumulus, DQVapDtCumulus, DTempDtLsc, DQVapDtLsc'
!!$/
!!$&gtool_historyauto_nml
!!$  Name = 'DTempDtDryConv'
