Class: NAMELIST

albedo_Matthews_nml( flag_annual_mean, OceanAlbedo )

*NAMELIST* :
`flag_annual_mean` :	`logical , save`
`OceanAlbedo` :	`real(DP) , save`

デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_flux_bulk#SurfFluxInit" for the default values.

This namelist group name is input/output in albedo_Matthews#SetAlbedoInit

auxiliary_nml( RefPress )

NAMELIST :

RefPress :

real(DP), save

:	基準気圧. Reference air pressure

デフォルト値については初期化手続 "auxiliary#AuxInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "auxiliary#AuxInit" for the default values.

This namelist group name is input/output in auxiliary#AuxInit

axesset_nml( Sigma, OMPNumThreads, Depth, flag_generate_sigma )

NAMELIST :

Sigma(1:MaxNmlArySize) :

real(DP), save

:	$σ$ レベル (半整数). Half $σ$ level

OMPNumThreads :

integer

:	OpenMP での最大スレッド数. openmp_threads に 1 より大きな値を指定すれば ISPACK の球面調和函数変換 OpenMP 並列計算ルーチンが用いられる. 並列計算を実行するには, 実行時に環境変数 OMP_NUM_THREADS を OMPNumThreads 以下の数字に設定する等のシステムに応じた準備が必要となる. OMPNumThreads に 1 より大きな値を指定しなければ並列計算ルーチンは呼ばれない.

Depth(1:MaxNmlArySize) :

real(DP), save

:	入力用配列, 地下の鉛直層境界 array for input, layer interface of subsurface vertical layer

flag_generate_sigma :

logical

:	鉛直層数の内部生成のためのフラグ Flag for generation of sigma levels internally

デフォルト値については初期化手続 "axesset#AxessetInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "axesset#AxessetInit" for the default values.

This namelist group name is input/output in axesset#AxessetInit

bucket_model_nml( FlagBucketModel, SoilMoistCritAmnt, SoilMoistCritAmntforEvapEff, FlagBucketModelSnow )

NAMELIST :

FlagBucketModel :

logical, save, public

:	バケツモデルオン／オフ. bucket model on/off.

SoilMoistCritAmnt :

real(DP), save

:	<Japanese> Critical amount of soil moisture

SoilMoistCritAmntforEvapEff :

real(DP), save

:	<Japanese> Critical amount of soil moisture for evaporation efficiency

FlagBucketModelSnow :

logical, save, public

:	バケツモデル雪の扱いオン／オフ. bucket model treatment of snow on/off.

実行文 ; Executable statement

This namelist group name is input/output in Bucket_Model#BucketInit

check_prog_vars_nml( VelMin, VelMax, TempMin, TempMax )

NAMELIST :

VelMin :

real(DP), save

:	風速最小値 Minimum value of wind velocity

VelMax :

real(DP), save

:	風速最大値 Maximum value of wind velocity

TempMin :

real(DP), save

:	温度最小値 Minimum value of temperature

TempMax :

real(DP), save

:	温度最大値 Maximum value of temperature

デフォルト値については初期化手続 "check_prog_vars#CheckProgVarsInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "check_prog_vars#CheckProgVarsInit" for the default values.

This namelist group name is input/output in check_prog_vars#CheckProgVarsInit

composition_nml( ncmax, IndexH2OVap )

NAMELIST :

ncmax :

integer , save, public

:	成分の数 Number of composition

IndexH2OVap :

integer , save, public

:	水蒸気のインデックス Index for water vapor

デフォルト値については初期化手続 "composition#CompositionInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "composition#CompositionInit" for the default values.

This namelist group name is input/output in composition#CompositionInit

constants_nml( RPlanet, Omega, Grav, MolWtDry, CpDry, GasRDry, MolWtWet, CpWet, GasRWet, LatentHeat, EpsV )

NAMELIST :

RPlanet :

real(DP), save, public

:	$a$ [m]. 惑星半径. Radius of planet

Omega :

real(DP), save, public

:	$Ω$ [s-1]. 回転角速度. Angular velocity

Grav :

real(DP), save, public

:	$g$ [m s-2]. 重力加速度. Gravitational acceleration

MolWtDry :

real(DP), save, public

:	$M$ [kg mol-1]. 乾燥大気の平均分子量. Mean molecular weight of dry air

CpDry :

real(DP), save, public

:	$C_{p}$ [J kg-1 K-1]. 乾燥大気の定圧比熱. Specific heat of air at constant pressure

GasRDry :

real(DP), save, public

:	$R$ [J kg-1 K-1]. 乾燥大気の気体定数. Gas constant of air

MolWtWet :

real(DP), save, public

:	$M_{v}$ [kg mol-1]. 凝結成分の平均分子量. Mean molecular weight of condensible elements

CpWet :

real(DP), save, public

:	$C_{v}$ [J kg-1 K-1] . 凝結成分の定圧比熱. Specific heat of condensible elements at constant pressure

GasRWet :

real(DP), save, public

:	$R_{v}$ [J kg-1 K-1]. 凝結成分の気体定数. Gas constant of condensible elements

LatentHeat :

real(DP), save, public

:	$L$ [J kg-1] . 凝結の潜熱. Latent heat of condensation

EpsV :

real(DP), save, public

:	$ε_{v}$ . 水蒸気分子量比. Molecular weight of water vapor

デフォルト値については初期化手続 "constants#ConstantsInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "constants#ConstantsInit" for the default values.

This namelist group name is input/output in constants#ConstantsInit

constants_snowseaice_nml( ThresholdSurfSnow , SnowAlbedo , TempCondWater , SeaIceVolHeatCap , SeaIceThermCondCoef, SeaIceThreshold , SeaIceThickness , TempBelowSeaIce , SeaIceAlbedo )

NAMELIST :

ThresholdSurfSnow : real(DP), public, save

SnowAlbedo : real(DP), public, save

TempCondWater :

real(DP), public, save

:	<Japanese> Condensation temperature of water

SeaIceVolHeatCap :

real(DP), public, save

:	Volumetric heat capacity of sea ice (J m-3 K-1)

SeaIceThermCondCoef :

real(DP), public, save

:	Thermal conductivity of sea ice (W m-1 K-1)

SeaIceThreshold : real(DP), public, save

SeaIceThickness : real(DP), public, save

TempBelowSeaIce : real(DP), public, save

SeaIceAlbedo : real(DP), public, save

デフォルト値については初期化手続 "constants#ConstantsInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "constants#ConstantsInit" for the default values.

This namelist group name is input/output in constants_snowseaice#ConstantsSnowSeaIceInit

cumulus_adjust_nml( CrtlRH, ItrtMax, TempSatMax )

NAMELIST :

CrtlRH :

real(DP), save

:	臨界相対湿度. Critical relative humidity

ItrtMax :

integer, save

:	イテレーション回数. Number of iteration

TempSatMax(1:MaxNmlArySize) :

real(DP), save

:	不安定の許容誤差. Admissible error of unstability

デフォルト値については初期化手続 "cumulus_adjust#CumAdjInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "cumulus_adjust#CumAdjInit" for the default values.

This namelist group name is input/output in cumulus_adjust#CumAdjInit

dcpam_main_nml( FlagDynamics, FlagFullPhysics, FlagHS94, FlagVenusSimple, FlagRadiationDennouAGCM, FlagSSModel, FlagSSModelSO, FlagVerticalFilter )

NAMELIST :

FlagDynamics :

logical

:	力学過程計算用フラグ Flag for dynamics

FlagFullPhysics :

logical

:	全物理過程計算用フラグ Flag for full physics

FlagHS94 :

logical

:	Held and Suarez (1994) 強制オン／オフ. Held and Suarez (1994) forcing on/off.

FlagVenusSimple :

logical

:	金星簡単強制用フラグ Flag for simple forcing for Venus

FlagRadiationDennouAGCM :

logical

:	flag for use of radiation model used in DennouAGCM

FlagSSModel :

logical

:	flag for use of subsurface grid

デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "main/dcpam_main.F90#MainInit" for the default values.

This namelist group name is input/output in main/dcpam_main.f90#MainInit

dcpam_main_nml( FlagDynamics, FlagFullPhysics, FlagHS94, FlagVenusSimple, FlagRadiationDennouAGCM, FlagSSModel, FlagSSModelSO, FlagVerticalFilter )

NAMELIST :

FlagDynamics :

logical

:	力学過程計算用フラグ Flag for dynamics

FlagFullPhysics :

logical

:	全物理過程計算用フラグ Flag for full physics

FlagHS94 :

logical

:	Held and Suarez (1994) 強制オン／オフ. Held and Suarez (1994) forcing on/off.

FlagVenusSimple :

logical

:	金星簡単強制用フラグ Flag for simple forcing for Venus

FlagRadiationDennouAGCM :

logical

:	flag for use of radiation model used in DennouAGCM

FlagSSModel :

logical

:	flag for use of subsurface grid

FlagSSModelSO :

logical

:	flag for use of slab ocean

FlagVerticalFilter :

logical

:	flag for use of vertical filter

デフォルト値については初期化手続 "main/dcpam_main.F90#MainInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "main/dcpam_main.F90#MainInit" for the default values.

This namelist group name is input/output in main/dcpam_main.f90#dcpam_main

dry_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion, FlagUse )

NAMELIST :

CrtlRH :

real(DP), save

:	臨界相対湿度. Critical relative humidity

ItrtMax :

integer, save

:	イテレーション回数. Number of iteration

AdjustCriterion(1:MaxNmlArySize) :

real(DP), save

:	調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of adjustment (temperature difference equivalent to difference of dry static energy)

FlagUse :

logical, save

:	使用フラグ flag for use of this scheme

デフォルト値については初期化手続 "dry_conv_adjust#DryConvAdjustInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "dry_conv_adjust#DryConvAdjustInit" for the default values.

This namelist group name is input/output in dry_conv_adjust#DryConvAdjustInit

dryconv_adjust_nml( ItrtMax, TempSatMax, flag_dryconv_adjust )

NAMELIST :

ItrtMax :

integer, save

:	イテレーション回数. Number of iteration

TempSatMax(1:MaxNmlArySize) :

real(DP), save

:	不安定の許容誤差. Admissible error of unstability

flag_dryconv_adjust :

logical, save

:	乾燥対流調節使用フラグ flag for use of dry convective adjustment

デフォルト値については初期化手続 "dryconv_adjust#DryConvAdjInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "dryconv_adjust#DryConvAdjInit" for the default values.

This namelist group name is input/output in dryconv_adjust#DryConvAdjInit

dynamics_hspl_vas83_nml( TimeIntegScheme, HDOrder, HDEFoldTimeValue, HDEFoldTimeUnit, FlagSpongeLayer, FlagSpongeLayerforZonalMean, FlagSpongeLayerforHeat, SLEFoldTimeValue, SLEFoldTimeUnit, SLOrder, SLNumLayer, RefTemp, FlagMassFixer )

NAMELIST :

TimeIntegScheme :

character(TOKEN)

:	時間積分法. 以下の方法を選択可能. Time integration scheme. Available schemes are as follows. "Semi-implicit" "Explicit"

HDOrder :

integer

:	超粘性の次数. Order of hyper-viscosity

HDEFoldTimeValue :

real(DP)

:	最大波数に対する e-folding time. 負の値を与えると, 水平拡散係数をゼロにします. E-folding time for maximum wavenumber. If negative value is given, coefficients of horizontal diffusion become zero.

HDEFoldTimeUnit :

character(TOKEN)

:	最大波数に対する e-folding time の単位. Unit of e-folding time for maximum wavenumber

FlagSpongeLayer : logical

FlagSpongeLayerforZonalMean : logical

FlagSpongeLayerforHeat : logical

SLEFoldTimeValue :

real(DP)

:	スポンジ層の最上層における減衰時定数 Damping time constant at the top model layer in a sponge layer

SLEFoldTimeUnit :

character(TOKEN)

:	SLEFoldTimeValue の単位 Unit of SLEFoldTimeValue

SLOrder :

integer

:	スポンジ層の減衰係数の sigma 依存性のオーダ Sigma dependence of damping coefficient in a sponge layer

SLNumLayer :

integer

:	スポンジ層が適応されるモデル上端からの層の数 Number of layers which the sponge layer is applied.

RefTemp :

real(DP)

:	$\bar{T}$ . 基準温度. Reference temperature

FlagMassFixer :

logical, save

:	Flag for mass fixer

デフォルト値については初期化手続 "dynamics_hspl_vas83#DynamicsInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "dynamics_hspl_vas83#DynamicsInit" for the default values.

This namelist group name is input/output in dynamics_hspl_vas83#DynamicsInit

fileset_nml( FileTitle, FileSource, FileInstitution )

NAMELIST :

FileTitle :

character(STRING), save, public

:	出力データファイルの表題. Title of output data files

FileSource :

character(STRING), save, public

:	データファイル作成の手段. Source of data file

FileInstitution :

character(STRING), save, public

:	データファイルを最終的に変更した組織/個人. Institution or person that changes data files for the last time

デフォルト値については初期化手続 "fileset#FilesetInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "fileset#FilesetInit" for the default values.

This namelist group name is input/output in fileset#FilesetInit

gridset_nml( nmax, imax, jmax_global, jmax, kmax, kslmax )

NAMELIST :

nmax :

integer, save, public

:	最大全波数. Maximum truncated wavenumber

imax :

integer, save, public

:	経度格子点数. Number of grid points in longitude

jmax_global :

integer, save, public

:	緯度格子点数 (全球). Number of grid points in latitude on whole globe

jmax :

integer, save, public

:	緯度格子点数. Number of grid points in latitude

kmax :

integer, save, public

:	鉛直層数. Number of vertical level

kslmax :

integer, save, public

:	地下の鉛直層数. Number of subsurface vertical level

デフォルト値については初期化手続 "gridset#GridsetInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "gridset#GridsetInit" for the default values.

This namelist group name is input/output in gridset#GridsetInit

initial_data_nml( Pattern, TempAvr, PsAvr, QVapAvr, Ueq )

NAMELIST :

Pattern :

character(STRING), save, public

:	初期値データのパターン. 以下のパターンを選択可能. Initial data pattern Available patterns are as follows. "Small Disturbance of Temperature" (default value) "AGCM 5.3 Default" "Sugiyama et al. (2008)"

TempAvr :

real(DP), save, public

:	$\bar{T}$ . 温度平均値. Mean temperature

PsAvr :

real(DP), save, public

:	$\bar{p_{s}}$ . 地表面気圧平均値. Mean surface pressure

QVapAvr :

real(DP), save, public

:	$\bar{q}$ . 比湿平均値. Mean specific humidity

Ueq :

real(DP), save, public

:	$u_{e q}$ . 赤道上の東西風速. Eastward wind on the equator

デフォルト値については初期化手続 "initial_data#InitDataInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "initial_data#InitDataInit" for the default values.

This namelist group name is input/output in initial_data#InitDataInit

lscond_nml( CrtlRH, ItrtMax, FlagUse )

NAMELIST :

CrtlRH :

real(DP), save

:	臨界相対湿度. Critical relative humidity

ItrtMax :

integer, save

:	イテレーション回数. Number of iteration

FlagUse :

logical, save

:	使用フラグ flag for use of this scheme

デフォルト値については初期化手続 "lscond#LSCondInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "lscond#LSCondInit" for the default values.

This namelist group name is input/output in lscond#LSCondInit

moist_conv_adjust_nml( CrtlRH, ItrtMax, AdjustCriterion, FlagUse )

NAMELIST :

CrtlRH :

real(DP), save

:	臨界相対湿度. Critical relative humidity

ItrtMax :

integer, save

:	イテレーション回数. Number of iteration

AdjustCriterion(1:MaxNmlArySize) :

real(DP), save

:	調節を行う基準 (湿潤静的エネルギーの差の温度換算値) Criterion of adjustment (temperature difference equivalent to difference of moist static energy)

FlagUse :

logical, save

:	使用フラグ flag for use of this scheme

デフォルト値については初期化手続 "moist_conv_adjust#CumAdjInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "moist_conv_adjust#MoistConvAdjustInit" for the default values.

This namelist group name is input/output in moist_conv_adjust#MoistConvAdjustInit

phy_implicit_sdh_nml( SOHeatCapacity )

NAMELIST :

SOHeatCapacity :

real(DP), save

:	Slab ocean heat capacity (J m-2 K-1)

Slab ocean heat capacity (J m-2 K-1)

デフォルト値については初期化手続 "phy_implicit#PhyImplInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "phy_implicit#PhyImplInit" for the default values.

This namelist group name is input/output in phy_implicit_sdh#PhyImplInit

radiation_CA81_nml( DiffFactor, ShortAtmosAlbedo )

NAMELIST :

DiffFactor : real(DP), save

ShortAtmosAlbedo :

real(DP), save

:	大気アルベド. Albedo of air.

デフォルト値については初期化手続 "radiation_LH74#RadiationLH74Init" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_LH74#RadiationLH74Init" for the default values.

This namelist group name is input/output in radiation_CA81#RadiationCA81Init

radiation_DennouAGCM_nml( DelTimeLongValue, DelTimeLongUnit, DelTimeShortValue, DelTimeShortUnit, LongBandNum, LongAbsorpCoefQVap, LongAbsorpCoefDryAir, LongBandWeight, LongPathLengthFact, ShortBandNum, ShortAbsorpCoefQVap, ShortAbsorpCoefDryAir, ShortBandWeight, ShortSecScat, ShortAtmosAlbedo, RstInputFile, RstOutputFile )

NAMELIST :

DelTimeLongValue :

real(DP), save

:	長波フラックスを計算する時間間隔の数値. Value of interval step of long wave flux calculation

DelTimeLongUnit :

character(STRING), save

:	長波フラックスを計算する時間間隔の単位. Unit of interval step of long wave flux calculation

DelTimeShortValue :

real(DP), save

:	短波 (日射) フラックスを計算する時間間隔の数値. Value of interval step of short wave (insolation) flux calculation

DelTimeShortUnit :

character(STRING), save

:	短波 (日射) フラックスを計算する時間間隔の単位. Unit of interval step of short wave (insolation) flux calculation

LongBandNum :

integer, save

:	長波バンド数. Number of long wave band

LongAbsorpCoefQVap(1:MaxNmlArySize) :

real(DP), save

:	$k_{R}$ . 水の吸収係数. Absorption coefficient of water.

LongAbsorpCoefDryAir(1:MaxNmlArySize) :

real(DP), save

:	${\bar{k}}_{R}$ . 空気の吸収係数. Absorption coefficient of air.

LongBandWeight(1:MaxNmlArySize) :

real(DP), save

:	バンドウェイト. Band weight.

LongPathLengthFact :

real(DP), save

:	光路長のファクタ. Factor of optical length

ShortBandNum :

integer, save

:	短波バンド数. Number of short wave band

ShortAbsorpCoefQVap(1:MaxNmlArySize) :

real(DP), save

:	$k_{S}$ . 水の吸収係数. Absorption coefficient of water.

ShortAbsorpCoefDryAir(1:MaxNmlArySize) :

real(DP), save

:	${\bar{k}}_{S}$ . 空気の吸収係数. Absorption coefficient of air.

ShortBandWeight(1:MaxNmlArySize) :

real(DP), save

:	バンドウェイト. Band weight.

ShortSecScat :

real(DP), save

:	散乱の $\sec ζ$ . $\sec ζ$ of scattering

ShortAtmosAlbedo :

real(DP), save

:	大気アルベド. Albedo of air.

RstInputFile :

character(STRING)

:	入力するリスタートデータのファイル名 Filename of input restart data

RstOutputFile :

character(STRING)

:	出力するリスタートデータのファイル名 Filename of output restart data

デフォルト値については初期化手続 "radiation_DennouAGCM#RadiationInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_DennouAGCM#RadiationInit" for the default values.

This namelist group name is input/output in radiation_DennouAGCM#RadiationInit

radiation_LH74_nml( DiffFactorH2O, DiffFactorO3, ShortAtmosAlbedo, FlagSimpleMagFac )

NAMELIST :

DiffFactorH2O : real(DP), save

DiffFactorO3 : real(DP), save

ShortAtmosAlbedo :

real(DP), save

:	大気アルベド. Albedo of air.

FlagSimpleMagFac :

logical , save

:	エアマス計算のためのフラグ Flag for air-mass calculation

デフォルト値については初期化手続 "radiation_LH74#RadiationLH74Init" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_LH74#RadiationLH74Init" for the default values.

This namelist group name is input/output in radiation_LH74#RadiationLH74Init

radiation_RL78_nml( VMRCO2, DelTimeCalcTransValue, DelTimeCalcTransUnit, flag_save_time )

NAMELIST :

VMRCO2 :

real(DP), save

:	Volume mixing ratio of CO2

DelTimeCalcTransValue : real(DP)

DelTimeCalcTransUnit : character(STRING)

flag_save_time : logical , save

This namelist group name is input/output in radiation_RL78#RadiationRoeweLiouInit

radiation_dcpam_E_SW_V1_nml( MeanMolWeight, O3MolWeight, FlagRayleighScattering, flag_save_time )

*NAMELIST* :
`MeanMolWeight` :	`real(DP), save`
`O3MolWeight` :	`real(DP), save`
`FlagRayleighScattering` :	`logical , save`
`flag_save_time` :	`logical , save`

デフォルト値については初期化手続 "radiation_dcpam_SWEV1#RadiationDcpamSWEV1Init" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_dcpam_SWEV1#RadiationDcpamSWEV1Init" for the default values.

This namelist group name is input/output in radiation_dcpam_E_SW_V1#RadiationDcpamESWV1Init

radiation_short_income_nml( FlagRadiationSynchronous, SolarConst, AnnualMean, DiurnalMean, YearLengthScld, DayLengthScld, EpsOrb, EqnOrb, Eccentricity, MeanAnomary_init, MaxItrEccAnomary, ThreEccAnomaryError, IncomAIns, IncomBIns, IncomAZet, IncomBZet )

NAMELIST :

FlagRadiationSynchronous :

logical

:	同期回転日射のフラグ Flag for synchronous rotation

SolarConst :

real(DP), save

:	太陽定数. Solar constant.

AnnualMean :

integer, save

:	年平均入射フラグ. Flag for annual mean incoming radiation.

DiurnalMean :

integer, save

:	日平均入射フラグ. Flag for diurnal mean incoming radiation.

YearLengthScld :

real(DP), save

:	モデルの 1 年でスケーリングした 1 年の長さ. Length of a year scaled by a year of model.

DayLengthScld :

real(DP), save

:	モデルの 1 日でスケーリングした 1 日の長さ. Length of a day scaled by a day of model.

EpsOrb :

real(DP), save

:	赤道傾斜角. Inclination of equator to orbit.

EqnOrb :

real(DP), save

:

昇降点黄経.

Eccentricity :

real(DP), save

:	離心率. Eccentricity.

MeanAnomary_init :

real(DP), save

:	計算開始時の平均近点角 (0.0 - 2PI). Mean anomary (0.0 - 2PI).

MaxItrEccAnomary :

integer, save

:	離心近点角を計算する時の最大繰り返し回数. Maximum iteration number of times to calculate eccentric anomary.

ThreEccAnomaryError :

real(DP), save

:	離心近点角を計算する時の誤差の許容しきい値. Threshold of error to calculate eccentric anomary.

IncomAIns :

real(DP), save

:	$A_{i n s}$ . 年平均入射の係数. Coefficient of annual mean incoming radiation.

IncomBIns :

real(DP), save

:	$B_{i n s}$ . 年平均入射の係数. AIns に同じ. Coefficient of annual mean incoming radiation. Same as "AIns".

IncomAZet :

real(DP), save

:	$A_{ζ}$ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean incoming radiation. Same as "AIns".

IncomBZet :

real(DP), save

:	$B_{ζ}$ . 年平均入射角の係数. AIns に同じ. Coefficient of annual mean incoming radiation. Same as "AIns".

デフォルト値については初期化手続 "radiation_short_income#ShtIncomeInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_short_income#ShtIncomeInit" for the default values.

This namelist group name is input/output in radiation_short_income#ShtIncomeInit

restart_file_io_nml( InputFile, OutputFile, IntValue, IntUnit )

NAMELIST :

InputFile :

character(STRING), save, public

:	入力するリスタートデータのファイル名 Filename of input restart data

OutputFile :

character(STRING), save, public

:	出力するリスタートデータのファイル名 Filename of output restart data

IntValue :

real, save, public

:	リスタートデータの出力間隔 (数値). Interval of restart data output (numerical value)

IntUnit :

character(TOKEN), save, public

:	リスタートデータの出力間隔 (単位). Interval of restart data output (unit)

デフォルト値については初期化手続 "restart_file_io#RestartFileInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "restart_file_io#RestartFileInit" for the default values.

This namelist group name is input/output in restart_file_io#RestartFileInit

restart_surftemp_io_nml( InputFile, InputName, OutputFile, IntValue, IntUnit )

NAMELIST :

InputFile :

character(STRING), save

:	入力するリスタートデータのファイル名 Filename of input restart data

InputName :

character(TOKEN), save

:	入力するリスタートデータの変数名 Variable name of input restart data

OutputFile :

character(STRING), save

:	出力するリスタートデータのファイル名 Filename of output restart data

IntValue :

real, save

:	リスタートデータの出力間隔. Interval of restart data output

IntUnit :

character(TOKEN)

:	リスタートデータの出力間隔の単位. Unit for interval of restart data output

デフォルト値については初期化手続 "restart_surftemp_io#RestartSurfTempInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "restart_surftemp_io#RestartSurfTempInit" for the default values.

This namelist group name is input/output in restart_surftemp_io#RestartSurfTempInit

set_O3_nml( FlagO3, O3File )

*NAMELIST* :
`FlagO3` :	`logical , save`
`O3File` :	`character(STRING), save`

デフォルト値については初期化手続 "radiation_DennouAGCM#RadiationInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "radiation_DennouAGCM#RadiationInit" for the default values.

This namelist group name is input/output in set_o3#SetO3Init

set_cloud_nml( FactorCondToCloudSW, FactorCondToCloudLW, FlagCloud )

NAMELIST :

FactorCondToCloudSW :

real(DP), save

:	A constant to be used to convert liquid water production rate in a layer to cloud optical depth in short wave radiation.

FactorCondToCloudLW :

real(DP), save

:	A constant to be used to convert liquid water production rate in a layer to cloud optical depth in long wave radiation.

FlagCloud :

logical , save

:	A flag for cloud set. If FlagCloud is true, the effect of cloud is considered. It should be noticed that in principle FlagCloud = .false. is equivalent to FactorCondToCloudSW = FactorCondToCloudLW = 0. So, this variable is verbose.

デフォルト値については初期化手続 "set_cloud#setCloudInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "set_cloud#SetCloudInit" for the default values.

This namelist group name is input/output in set_cloud#SetCloudInit

surface_data_nml( Pattern, SurfTemp, Albedo, HumidCoef, RoughLength, HeatCapacity, TempFlux, SurfCond, SeaIceConc )

NAMELIST :

Pattern :

character(STRING), save

:	地表面データのパターン. 以下のパターンを選択可能. Surface data pattern. Available patterns are as follows. "Hosaka et al. (1998)" "Homogeneous"

SurfTemp :

real(DP), save

:	地表面温度の基準値. Standard value of surface temperature

Albedo :

real(DP), save

:	地表アルベド. Surface albedo

HumidCoef :

real(DP), save

:	地表湿潤度. Surface humidity coefficient

RoughLength :

real(DP), save

:	地表粗度長. Surface rough length

HeatCapacity :

real(DP), save

:	地表熱容量. Surface heat capacity

TempFlux :

real(DP), save

:	地中熱フラックス. Ground temperature flux

SurfCond :

integer, save

:	地表状態 (0: 固定, 1: 可変). Surface condition (0: fixed, 1: variable)

SeaIceConc :

real(DP), save

:	海氷面密度 Sea ice concentration

デフォルト値については初期化手続 "surface_data#SurfDataInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_data#SurfDataInit" for the default values.

This namelist group name is input/output in surface_data#SurfDataInit

surface_flux_bulk_nml( FlagConstBulkCoef, FlagUseOfBulkCoefInNeutralCond, ConstBulkCoef, VelMinForRi, VelMinForVel, VelMinForTemp, VelMinForQVap, VelMaxForVel, VelMaxForTemp, VelMaxForQVap, VelBulkCoefMin, TempBulkCoefMin, QVapBulkCoefMin, VelBulkCoefMax, TempBulkCoefMax, QVapBulkCoefMax )

NAMELIST :

FlagConstBulkCoef :

logical, save

:	Flag for using constant bulk coefficient

FlagUseOfBulkCoefInNeutralCond :

logical, save

:	Flag for using bulk coefficient in neutral condition

ConstBulkCoef :

real(DP), save

:	バルク係数一定値. Steady value of bulk coefficient

VelMinForRi :

real(DP), save

:	$R_{i}$ 数用風最小値. Minimum value of velocity for $R_{i}$ number

VelMinForVel :

real(DP), save

:	運動量用風最小値. Minimum value of velocity for momentum

VelMinForTemp :

real(DP), save

:	熱用風最小値. Minimum value of velocity for thermal

VelMinForQVap :

real(DP), save

:	水蒸気用風最小値. Minimum value of velocity for vapor

VelMaxForVel :

real(DP), save

:	運動量用風最大値. Maximum value of velocity for momentum

VelMaxForTemp :

real(DP), save

:	熱用風最大値. Maximum value of velocity for thermal

VelMaxForQVap :

real(DP), save

:	水蒸気用風最大値. Maximum value of velocity for vapor

VelBulkCoefMin :

real(DP), save

:	$u$ バルク係数最小値. Minimum value of $u$ bulk coefficient

TempBulkCoefMin :

real(DP), save

:	$T$ バルク係数最小値. Minimum value of $T$ bulk coefficient

QVapBulkCoefMin :

real(DP), save

:	$q$ バルク係数最小値. Minimum value of $q$ bulk coefficient

VelBulkCoefMax :

real(DP), save

:	$u$ バルク係数最大値. Maximum value of $u$ bulk coefficient

TempBulkCoefMax :

real(DP), save

:	$T$ バルク係数最大値. Maximum value of $T$ bulk coefficient

QVapBulkCoefMax :

real(DP), save

:	$q$ バルク係数最大値. Maximum value of $q$ bulk coefficient

デフォルト値については初期化手続 "surface_flux_bulk#SurfFluxInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_flux_bulk#SurfFluxInit" for the default values.

This namelist group name is input/output in surface_flux_bulk#SurfFluxInit

surface_properties_nml( SurfTempSetting, SurfTempFile, SurfTempName, SeaIceSetting, SeaIceFile, SeaIceName, AlbedoSetting, AlbedoFile, AlbedoName, HumidCoefSetting, HumidCoefFile, HumidCoefName, RoughLengthSetting, RoughLengthFile, RoughLengthName, HeatCapacitySetting, HeatCapacityFile, HeatCapacityName, TempFluxSetting, TempFluxFile, TempFluxName, SurfCondSetting, SurfCondFile, SurfCondName, SurfHeightSetting, SurfHeightFile, SurfHeightName )

NAMELIST :

SurfTempSetting :

character(STRING), save

:	地表面温度の設定方法 Setting of surface temperature

SurfTempFile :

character(STRING), save

:	地表面温度のファイル名. File name of surface temperature

SurfTempName :

character(TOKEN) , save

:	地表面温度の変数名. Variable name of surface temperature

SeaIceSetting :

character(STRING), save

:	海氷面密度の設定方法 Setting of sea ice concentration

SeaIceFile :

character(STRING), save

:	海氷面密度のファイル名. File name of sea ice concentration

SeaIceName :

character(TOKEN) , save

:	海氷面密度の変数名. Variable name of sea ice concentration

AlbedoSetting :

character(STRING), save

:	地表アルベドの設定方法 Settingof surface albedo

AlbedoFile :

character(STRING), save

:	地表アルベドのファイル名. File name of surface albedo

AlbedoName :

character(TOKEN) , save

:	地表アルベドの変数名. Variable name of surface albedo

HumidCoefSetting :

character(STRING), save

:	地表湿潤度の設定方法 Setting of surface humidity coefficient

HumidCoefFile :

character(STRING), save

:	地表湿潤度のファイル名. File name of surface humidity coefficient

HumidCoefName :

character(TOKEN) , save

:	地表湿潤度の変数名. Variable name of surface humidity coefficient

RoughLengthSetting :

character(STRING), save

:	地表粗度長の設定方法 Setting of surface rough length

RoughLengthFile :

character(STRING), save

:	地表粗度長のファイル名. File name of surface rough length

RoughLengthName :

character(TOKEN) , save

:	地表粗度長の変数名. Variable name of surface rough length

HeatCapacitySetting :

character(STRING), save

:	地表熱容量の設定方法 Setting of surface heat capacity

HeatCapacityFile :

character(STRING), save

:	地表熱容量のファイル名. File name of surface heat capacity

HeatCapacityName :

character(TOKEN) , save

:	地表熱容量の変数名. Variable name of surface heat capacity

TempFluxSetting :

character(STRING), save

:	地中熱フラックスの設定方法 Setting of ground temperature flux

TempFluxFile :

character(STRING), save

:	地中熱フラックスのファイル名. File name of ground temperature flux

TempFluxName :

character(TOKEN) , save

:	地中熱フラックスの変数名. Variable name of ground temperature flux

SurfCondSetting :

character(STRING), save

:	地表状態の設定方法 Setting of surface condition

SurfCondFile :

character(STRING), save

:	地表状態のファイル名. File name of surface condition

SurfCondName :

character(TOKEN) , save

:	地表状態の変数名. Variable name of surface condition

SurfHeightSetting :

character(STRING), save

:	地表面高度の設定方法 Setting of surface height

SurfHeightFile :

character(STRING), save

:	地表面高度のファイル名. File name of surface height

SurfHeightName :

character(TOKEN) , save

:	地表面高度の変数名. Variable name of surface height

デフォルト値については初期化手続 "surface_properties#SurfacePropertiesInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "surface_properties#SurfacePropertiesInit" for the default values.

This namelist group name is input/output in surface_properties#SurfacePropertiesInit

timefilter_asselin1972_nml( FilterParameter )

NAMELIST :

FilterParameter :

real(DP), save

:

タイムフィルターの係数. Time filter coefficient

!$ integer, save:

IntStep ! タイムフィルターを適用するステップ間隔.

!$ ! Step interval of time filter application

!$ integer, save:

CurStep ! TimeFilter が呼ばれた回数.

!$ ! Number of times that "TimeFilter" is called

!$ integer, save:

PrevStep ! 前回タイムフィルターを適用したステップ数.

!$ ! Step number that is filtered previously

, IntStep

デフォルト値については初期化手続 "timefilter_asselin1972#Hs94Init" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "timefilter_asselin1972#Hs94Init" for the default values.

This namelist group name is input/output in timefilter_asselin1972#TimeFiltInit

timeset_nml( StartTimeValue, StartTimeUnit, EndTimeValue, EndTimeUnit, DelTimeValue, DelTimeUnit, PredictIntValue, PredictIntUnit, CpuTimeMoniter, Date, Calendar )

NAMELIST :

StartTimeValue :

real(DP), save

:	計算開始時刻. Start time of calculation

StartTimeUnit :

character(TOKEN), save

:	計算開始時刻の単位. Unit of start time of calculation

EndTimeValue :

real(DP), save

:	計算終了時刻. End time of calculation

EndTimeUnit :

character(TOKEN), save

:	計算開始時刻の単位. Unit of end time of calculation

DelTimeValue :

real(DP), save

:	$Δ t$ . 単位は DelTimeUnit にて指定. Unit is specified by "DelTimeUnit".

DelTimeUnit :

character(TOKEN), save

:	$Δ t$ の単位. Unit of $Δ t$

PredictIntValue :

real(DP), save

:	終了予測日時表示間隔. Interval of predicted end time output

PredictIntUnit :

character(TOKEN), save

:	終了予測日時表示間隔 (単位). Unit for interval of predicted end time output

CpuTimeMoniter :

logical, save

:	CPU 時間計測のオンオフ On/off of CPU time monitoring

Date(8) :

integer, save

:	計算開始日時. (年月日時分秒, タイムゾーン時分) Start date of calculation. (year, month, day, hour, minute, second, and hour, minute of time zone)

Calendar :

character(TOKEN), save

:	暦法. Calendar

デフォルト値については初期化手続 "timeset#TimesetInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "timeset#TimesetInit" for the default values.

This namelist group name is input/output in timeset#TimesetInit

vdiffusion_my1974_nml( FlagConstDiffCoef, ConstDiffCoefM, ConstDiffCoefH, SquareVelMin, BulkRiNumMin, MixLengthMax, TildeShMin, TildeSmMin, VelDiffCoefMin, TempDiffCoefMin, QMixDiffCoefMin, VelDiffCoefMax, TempDiffCoefMax, QMixDiffCoefMax, MYLv2ParamA1, MYLv2ParamB1, MYLv2ParamA2, MYLv2ParamB2, MYLv2ParamC1 )

NAMELIST :

FlagConstDiffCoef :

logical , save

:	Flag for use of constant diffusion coefficient

ConstDiffCoefM :

real(DP), save

:	Diffusion coefficient for momentum that is used in the case of FlagConstDiffCoef == .true.

ConstDiffCoefH :

real(DP), save

:	Diffusion coefficient for heat that is used in the case of FlagConstDiffCoef == .true.

SquareVelMin :

real(DP), save

:	風二乗差最小値. Minimum value of square of velocity

BulkRiNumMin :

real(DP), save

:	バルク $R_{i}$ 数最小値. Minimum value of bulk $R_{i}$

MixLengthMax :

real(DP), save

:	最大混合距離. Maximum mixing length

TildeShMin :

real(DP), save

:	$\tilde{S_{h}}$ 最小値. Minimum $\tilde{S_{h}}$

TildeSmMin :

real(DP), save

:	$\tilde{S_{m}}$ 最小値. Minimum $\tilde{S_{m}}$

VelDiffCoefMin :

real(DP), save

:	$\vec{u}$ 拡散係数最小値. Minimum diffusion coefficient of $\vec{u}$

TempDiffCoefMin :

real(DP), save

:	$T$ 拡散係数最小値. Minimum diffusion coefficient of $T$

QMixDiffCoefMin :

real(DP), save

:	$q$ 拡散係数最小値. Minimum diffusion coefficient of $q$

VelDiffCoefMax :

real(DP), save

:	$\vec{u}$ 拡散係数最大値. Maximum diffusion coefficient of $\vec{u}$

TempDiffCoefMax :

real(DP), save

:	$T$ 拡散係数最大値. Maximum diffusion coefficient of $T$

QMixDiffCoefMax :

real(DP), save

:	$q$ 拡散係数最大値. Maximum diffusion coefficient of $q$

MYLv2ParamA1 : real(DP), save

MYLv2ParamB1 : real(DP), save

MYLv2ParamA2 : real(DP), save

MYLv2ParamB2 : real(DP), save

MYLv2ParamC1 : real(DP), save

デフォルト値については初期化手続 "vdiffusion_my1974#VDiffInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "vdiffusion_my1974#VDiffInit" for the default values.

This namelist group name is input/output in vdiffusion_my1974#VDiffInit

venus_simple_forcing_nml( SurfFrictionTimeConstInEarthDay, VDiffCoefM, VDiffCoefH, FlagConstNCC, ConstNCCInEarthDay )

*NAMELIST* :
`SurfFrictionTimeConstInEarthDay` :	`real(DP), save`
`VDiffCoefM` :	`real(DP), save`
`VDiffCoefH` :	`real(DP), save`
`FlagConstNCC` :	`logical , save`
`ConstNCCInEarthDay` :	`real(DP), save`

デフォルト値については初期化手続 "venus_simple_forcing#VenusSimpleForcingInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "venus_simple_forcing#VenusSimpleForcingInit" for the default values.

This namelist group name is input/output in venus_simple_forcing#VenusSimpleForcingInit

vertical_filter_nml( FilterParameter )

NAMELIST :

FilterParameter :

real(DP), save

:

鉛直フィルターの係数. Vertical filter coefficient

!$ integer, save:

IntStep ! 鉛直フィルターを適用するステップ間隔.

!$ ! Step interval of vertical filter application

!$ integer, save:

CurStep ! VerticalFilter が呼ばれた回数.

!$ ! Number of times that "VerticalFilter" is called

!$ integer, save:

PrevStep ! 前回鉛直フィルターを適用したステップ数.

!$ ! Step number that is filtered previously

, IntStep

デフォルト値については初期化手続 "vertical_filter#VerticalFilterInit" のソースコードを参照のこと.

Refer to source codes in the initialization procedure "vertical_filter#VerticalFilterInit" for the default values.

This namelist group name is input/output in vertical_filter#VerticalFilterInit

Methods

Public Instance methods