| Top |
| gboolean | active | Read / Write |
| char * | eid | Read / Write |
| GStrv | emergency-numbers | Read / Write |
| char * | imsi | Read / Write |
| char * | operator-identifier | Read / Write |
| char * | operator-name | Read / Write |
| GVariant * | preferred-networks | Read / Write |
| char * | sim-identifier | Read / Write |
This section contains code for working with the org.freedesktop.ModemManager1.Sim D-Bus interface in C.
gboolean
mm_gdbus_sim_get_active (MmGdbusSim *object);
Gets the value of the "Active" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_sim_get_imsi (MmGdbusSim *object);
Gets the value of the "Imsi" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_imsi() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_sim_dup_imsi (MmGdbusSim *object);
Gets a copy of the "Imsi" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_sim_get_eid (MmGdbusSim *object);
Gets the value of the "Eid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_eid() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_sim_dup_eid (MmGdbusSim *object);
Gets a copy of the "Eid" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_sim_get_sim_identifier (MmGdbusSim *object);
Gets the value of the "SimIdentifier" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_sim_identifier() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_sim_dup_sim_identifier (MmGdbusSim *object);
Gets a copy of the "SimIdentifier" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_sim_get_operator_identifier (MmGdbusSim *object);
Gets the value of the "OperatorIdentifier" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_operator_identifier() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_sim_dup_operator_identifier (MmGdbusSim *object);
Gets a copy of the "OperatorIdentifier" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_sim_get_operator_name (MmGdbusSim *object);
Gets the value of the "OperatorName" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_operator_name() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_sim_dup_operator_name (MmGdbusSim *object);
Gets a copy of the "OperatorName" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *const *
mm_gdbus_sim_get_emergency_numbers (MmGdbusSim *object);
Gets the value of the "EmergencyNumbers" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_emergency_numbers() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar **
mm_gdbus_sim_dup_emergency_numbers (MmGdbusSim *object);
Gets a copy of the "EmergencyNumbers" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
The property value or NULL if the property is not set. The returned value should be freed with g_strfreev().
[transfer full][nullable]
GVariant *
mm_gdbus_sim_dup_preferred_networks (MmGdbusSim *object);
Gets a copy of the "PreferredNetworks" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
The property value or NULL if the property is not set. The returned value should be freed with g_variant_unref().
[transfer full][nullable]
GVariant *
mm_gdbus_sim_get_preferred_networks (MmGdbusSim *object);
Gets the value of the "PreferredNetworks" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_sim_dup_preferred_networks() if on another thread.
[skip]
The property value or NULL if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
void mm_gdbus_sim_call_send_pin (MmGdbusSim *proxy,const gchar *arg_pin,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the SendPin()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_sim_call_send_pin_finish() to get the result of the operation.
See mm_gdbus_sim_call_send_pin_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_sim_call_send_pin_finish (MmGdbusSim *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_sim_call_send_pin().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_sim_call_send_pin_sync (MmGdbusSim *proxy,const gchar *arg_pin,GCancellable *cancellable,GError **error);
Synchronously invokes the SendPin()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_sim_call_send_pin() for the asynchronous version of this method.
proxy |
||
arg_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_sim_call_send_puk (MmGdbusSim *proxy,const gchar *arg_puk,const gchar *arg_pin,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the SendPuk()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_sim_call_send_puk_finish() to get the result of the operation.
See mm_gdbus_sim_call_send_puk_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_puk |
Argument to pass with the method invocation. |
|
arg_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_sim_call_send_puk_finish (MmGdbusSim *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_sim_call_send_puk().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_sim_call_send_puk_sync (MmGdbusSim *proxy,const gchar *arg_puk,const gchar *arg_pin,GCancellable *cancellable,GError **error);
Synchronously invokes the SendPuk()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_sim_call_send_puk() for the asynchronous version of this method.
proxy |
||
arg_puk |
Argument to pass with the method invocation. |
|
arg_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_sim_call_enable_pin (MmGdbusSim *proxy,const gchar *arg_pin,gboolean arg_enabled,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the EnablePin()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_sim_call_enable_pin_finish() to get the result of the operation.
See mm_gdbus_sim_call_enable_pin_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_pin |
Argument to pass with the method invocation. |
|
arg_enabled |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_sim_call_enable_pin_finish (MmGdbusSim *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_sim_call_enable_pin().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_sim_call_enable_pin_sync (MmGdbusSim *proxy,const gchar *arg_pin,gboolean arg_enabled,GCancellable *cancellable,GError **error);
Synchronously invokes the EnablePin()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_sim_call_enable_pin() for the asynchronous version of this method.
proxy |
||
arg_pin |
Argument to pass with the method invocation. |
|
arg_enabled |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_sim_call_change_pin (MmGdbusSim *proxy,const gchar *arg_old_pin,const gchar *arg_new_pin,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the ChangePin()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_sim_call_change_pin_finish() to get the result of the operation.
See mm_gdbus_sim_call_change_pin_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_old_pin |
Argument to pass with the method invocation. |
|
arg_new_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_sim_call_change_pin_finish (MmGdbusSim *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_sim_call_change_pin().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_sim_call_change_pin_sync (MmGdbusSim *proxy,const gchar *arg_old_pin,const gchar *arg_new_pin,GCancellable *cancellable,GError **error);
Synchronously invokes the ChangePin()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_sim_call_change_pin() for the asynchronous version of this method.
proxy |
||
arg_old_pin |
Argument to pass with the method invocation. |
|
arg_new_pin |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_sim_call_set_preferred_networks (MmGdbusSim *proxy,GVariant *arg_preferred_networks,GCancellable *cancellable,GAsyncReadyCallback callback,gpointer user_data);
Asynchronously invokes the SetPreferredNetworks()proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_sim_call_set_preferred_networks_finish() to get the result of the operation.
See mm_gdbus_sim_call_set_preferred_networks_sync() for the synchronous, blocking version of this method.
proxy |
||
arg_preferred_networks |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_sim_call_set_preferred_networks_finish (MmGdbusSim *proxy,GAsyncResult *res,GError **error);
Finishes an operation started with mm_gdbus_sim_call_set_preferred_networks().
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_sim_call_set_preferred_networks_sync (MmGdbusSim *proxy,GVariant *arg_preferred_networks,GCancellable *cancellable,GError **error);
Synchronously invokes the SetPreferredNetworks()proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_sim_call_set_preferred_networks() for the asynchronous version of this method.
proxy |
||
arg_preferred_networks |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
typedef struct _MmGdbusSim MmGdbusSim;
Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Sim.
struct MmGdbusSimIface {
GTypeInterface parent_iface;
gboolean (*handle_change_pin) (
MmGdbusSim *object,
GDBusMethodInvocation *invocation,
const gchar *arg_old_pin,
const gchar *arg_new_pin);
gboolean (*handle_enable_pin) (
MmGdbusSim *object,
GDBusMethodInvocation *invocation,
const gchar *arg_pin,
gboolean arg_enabled);
gboolean (*handle_send_pin) (
MmGdbusSim *object,
GDBusMethodInvocation *invocation,
const gchar *arg_pin);
gboolean (*handle_send_puk) (
MmGdbusSim *object,
GDBusMethodInvocation *invocation,
const gchar *arg_puk,
const gchar *arg_pin);
gboolean (*handle_set_preferred_networks) (
MmGdbusSim *object,
GDBusMethodInvocation *invocation,
GVariant *arg_preferred_networks);
gboolean (*get_active) (MmGdbusSim *object);
const gchar * (*get_eid) (MmGdbusSim *object);
const gchar *const * (*get_emergency_numbers) (MmGdbusSim *object);
const gchar * (*get_imsi) (MmGdbusSim *object);
const gchar * (*get_operator_identifier) (MmGdbusSim *object);
const gchar * (*get_operator_name) (MmGdbusSim *object);
GVariant * (*get_preferred_networks) (MmGdbusSim *object);
const gchar * (*get_sim_identifier) (MmGdbusSim *object);
};
Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Sim.
GTypeInterface |
The parent interface. |
|
Handler for the “handle-change-pin” signal. |
||
Handler for the “handle-enable-pin” signal. |
||
Handler for the “handle-send-pin” signal. |
||
Handler for the “handle-send-puk” signal. |
||
Handler for the “handle-set-preferred-networks” signal. |
||
Getter for the “active” property. |
||
Getter for the “eid” property. |
||
Getter for the “emergency-numbers” property. |
||
Getter for the “imsi” property. |
||
Getter for the “operator-identifier” property. |
||
Getter for the “operator-name” property. |
||
Getter for the “preferred-networks” property. |
||
Getter for the “sim-identifier” property. |
“active” property“active” gboolean
Represents the D-Bus property "Active".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: FALSE
“eid” property “eid” char *
Represents the D-Bus property "Eid".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: NULL
“emergency-numbers” property“emergency-numbers” GStrv
Represents the D-Bus property "EmergencyNumbers".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
“imsi” property “imsi” char *
Represents the D-Bus property "Imsi".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: NULL
“operator-identifier” property “operator-identifier” char *
Represents the D-Bus property "OperatorIdentifier".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: NULL
“operator-name” property “operator-name” char *
Represents the D-Bus property "OperatorName".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: NULL
“preferred-networks” property“preferred-networks” GVariant *
Represents the D-Bus property "PreferredNetworks".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Allowed values: GVariant<a(su)>
Default value: NULL
“sim-identifier” property “sim-identifier” char *
Represents the D-Bus property "SimIdentifier".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusSim
Flags: Read / Write
Default value: NULL
“handle-change-pin” signalgboolean user_function (MmGdbusSim *object, GDBusMethodInvocation *invocation, char *arg_old_pin, char *arg_new_pin, gpointer user_data)
Signal emitted when a remote caller is invoking the ChangePin()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_sim_complete_change_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
A MmGdbusSim. |
|
invocation |
||
arg_old_pin |
Argument passed by remote caller. |
|
arg_new_pin |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-enable-pin” signalgboolean user_function (MmGdbusSim *object, GDBusMethodInvocation *invocation, char *arg_pin, gboolean arg_enabled, gpointer user_data)
Signal emitted when a remote caller is invoking the EnablePin()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_sim_complete_enable_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
A MmGdbusSim. |
|
invocation |
||
arg_pin |
Argument passed by remote caller. |
|
arg_enabled |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-send-pin” signalgboolean user_function (MmGdbusSim *object, GDBusMethodInvocation *invocation, char *arg_pin, gpointer user_data)
Signal emitted when a remote caller is invoking the SendPin()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_sim_complete_send_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
A MmGdbusSim. |
|
invocation |
||
arg_pin |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-send-puk” signalgboolean user_function (MmGdbusSim *object, GDBusMethodInvocation *invocation, char *arg_puk, char *arg_pin, gpointer user_data)
Signal emitted when a remote caller is invoking the SendPuk()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_sim_complete_send_puk() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
A MmGdbusSim. |
|
invocation |
||
arg_puk |
Argument passed by remote caller. |
|
arg_pin |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last
“handle-set-preferred-networks” signalgboolean user_function (MmGdbusSim *object, GDBusMethodInvocation *invocation, GVariant *arg_preferred_networks, gpointer user_data)
Signal emitted when a remote caller is invoking the SetPreferredNetworks()
If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_sim_complete_set_preferred_networks() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
object |
A MmGdbusSim. |
|
invocation |
||
arg_preferred_networks |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.
Flags: Run Last